Hi,
We are running SAP ECC on Oracle Exadata in Oracle 11.2.0.4 database. The table FAGLFLEXA has reached a size of over 550 Gb and its 8 indexes reserve over 650 Gb.
Does anyone have experience with:
1) a table partitioning in SAP
2) SAP indexes on Exadata (are they all mandatory, are they any SAP rules and/or best practice for Exadata).
Many thanks for any hint!
Hello,
We just migrated our SAP systems running on Oracle 11gr2 to new Hardware. Due to this our security team performed an audit of our system and the question of high priority patches came up. Specifically how does SAP handle high priority patches (database and OS) that are released from Oracle and is it possible to apply them immediately before SAP officially certifies them.
Thanks.
Arnie
Hello, we have recently deleted a number of clients in our QA system and have a tablespace PSAPABA702X that is 112GB (5 datafiles) that is only 0.6% used.
What do you suggest to reduce the size of the tablespace and reclaim the unused space. This will have the added benefit of reduced our backup time as well.
Thanks
Scott
Hi Experts,
After the database restore, we are getting the below error of command output R3trans -d
LOG BZA=>table SVERS does not exist
Complete message of trans.log is attached
Restore, recovery, create ops$ account completed.
I have referred the below SAP Notes & thread
50088
134592
400241
534765
530392
Thread: 98940
Thanks,
Hello,
I am using SAP ECC6.0/oracle database with cluster mode on HP-UX os.
I am using backup on HP data protector tape drive.
I am going to upgrade the oracle, so want to test the backup.
How i can restore backup on windows server using tape drive.
Is there any way, Please update.
Regards
Santosh
Hi Experts, Our SAP system is running on OS: HP-UX, DB: Oracle, We are in new installation and backup is running using BRtools(DP). Today i seen the /oracle/SID/sapbackup filesystem is used 96 Percent. There are lots of file like arch1_1765_883920400.dbf.Z and besarrzc.anf. How should I clean these and what is the thumb rule ? Please help me. THanks Asad
Hello,
I have changed the sap data file name using brtools from /oracle/SID/sapdata3/sr4_22/sr4.data22 [D [D [D [D [D [D [D [D [D [D [D [D [D [D [D [D [D [D2 [C [C [C [C [C [C [C [C [C [C [C [C [C [C [C [C [C [C to /oracle/SID/sapdata3/sr4_22/sr4.data22
data file is online and no alert in alert log and health check but while i am taking backup getting error like
BR0069E File name /oracle/SID/sapdata2/sr4_23/sr4.data22 not unique - backup/verification not possible
BR0069E File name /oracle/SID/sapdata3/sr4_22/sr4.data22 not unique - backup/verification not possible
BR0056I End of database backup: besbarzc.and 2015-12-13 14.26.39
BR0280I BRBACKUP time stamp: 2015-12-13 14.26.39
BR0054I BRBACKUP terminated with errors
Please help.
Regards
Santosh
Hello guys,
I've setup our first 12c Oracle database and have some trouble with the brtools.
If I check the db via DB13 I get the following error message:
R0252E Function _stat64() failed for 'D:\oracle\oraclehome\PRD\12102' at location BrDiskStatGet-1 R0253E errno 2: No such file or directory R0277E Determination of disk volume status for D:\oracle\oraclehome\PRD\12102 failed
To fix this issue I give SAPServicePRD user full rights to "D:\oracle" folder.
First I thought I missed something during the installation (Oracle / SAP), but in the last few days I installed the same system on a sandbox:
- one with an Oracle home user (oraclehome (D:\oracle\oraclehome\PRD))
- one with build in system user (D:\oracle\PRD (like 10g))
On both this issue is coming up in DB13.
So I checked some old installations (10g, 11g) and never find a "SAPServiceSID" user with read/write rights in the Oraclehome directory.
First few directory deeper (D:\oracle\<SID>\<version>\database) there are some groups more added (ORA_<SID>_OPER and ORA_<SID>_DBA) where both SAP users (<SID>adm and SAPService<SID>) are members of.
There is also no SAP note that describes this error (BR0252E Function _stat64() failed) just some other error messages, which has nothing to do with this error message. About one year earlier this error came up on SCN (CheckDB fail with BR0252E Function stat() failed) that also fixed it with giving SAPServiceSID full rights on oracle.
So, I don't get the it, why I should use an extra oracle user for installation and for the oracle home directory, but I have to give afterwards SAPServiceSID manually full rights to this directory.
Does someone has a working 12c environment and can tell me what permissions are set in the directories (x:\oracle; x:\oracle\oraclehome; x:\oracle\oraclehome\12102 and x:\oracle\oraclehome\12102\database)
Environment:
Oracle 12102
Windows 2012 R2
SAP ERP 605
Thank you!
Best regards,
Tobias
Hello guys.
I´m perfomed the Oracle Upgrade 11.2.0.2 to 11.2.0.4. in the QAS System ERP 6.0 EHP5.
When the process run with DBUA (follow the note 1431793 - Oracle 11.2.0: Upgrade Scripts) in 47% Progress show me the error:
ORA-00955: name is already used by an existing object
The trace.log in the dir E:\oracle\cfgtoollogs\dbua\QAS\upgrade4:
[BasicStep.handleNonIgnorableError:431] ORA-00955: name is already used by an existing object
:msg
[Thread-137] [ 2015-12-16 14:07:26.898 VET ] [BasicStep.handleNonIgnorableError:430] oracle.sysman.assistants.util.UIMessageHandler@6e05b24c:messageHandler
[Thread-137] [ 2015-12-16 14:07:26.898 VET ] [BasicStep.handleNonIgnorableError:431] ORA-00955: name is already used by an existing object
:msg
[Thread-137] [ 2015-12-16 14:07:31.196 VET ] [BasicStep.handleNonIgnorableError:430] oracle.sysman.assistants.util.UIMessageHandler@6e05b24c:messageHandler
[Thread-137] [ 2015-12-16 14:07:31.196 VET ] [BasicStep.handleNonIgnorableError:431] ORA-00955: name is already used by an existing object
:msg
And the Oracle_Server.log:
alter session set events '14524 trace name context forever, level 1';
CREATE TABLE SYSTEM.LOGMNR_DICTSTATE$ (
2 LOGMNR_UID NUMBER(22),
3 START_SCNBAS NUMBER,
4 START_SCNWRP NUMBER,
5 END_SCNBAS NUMBER,
6 END_SCNWRP NUMBER,
7 REDO_THREAD NUMBER,
8 RBASQN NUMBER,
9 RBABLK NUMBER,
10 RBABYTE NUMBER,
11 LOGMNR_FLAGS NUMBER(22),
12 constraint LOGMNR_DICTSTATE$_PK
13 primary key (LOGMNR_UID) disable)
14 PARTITION BY RANGE(logmnr_uid)
15 ( PARTITION p_lessthan100 VALUES LESS THAN (100))
16 TABLESPACE SYSAUX LOGGING
17 /
CREATE TABLE SYSTEM.LOGMNR_DICTSTATE$ (
*
ERROR at line 1:
ORA-00955: name is already used by an existing object
And display more error with the same message with the others table.
What can i do?
Regards.
Desiree
Hi,
I'm on Oracle 10.2 Physical Data guard and restoring an online backup from Primary server to DR server. The online backup was taken on 30.11.2015 21:00:00 and finished at 01.12.2015 01:23:16. The first redo log when backup started is 60588 and the last redo log when the backup ends is 60596 according to the backup log. However it is asking beyond 60596 when doing recovery:
SQL> recover standby database using backup controlfile until cancel;
ORA-00279: change 952123702 generated at 12/01/2015 04:50:25 needed for thread
1
ORA-00289: suggestion : L:\ORACLE\A30\ORAARCH\A30ARCH\ARC60598_0681431456.001
ORA-00280: change 952123702 for thread 1 is in sequence #60598
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
ORA-00279: change 952134239 generated at 12/01/2015 05:50:32 needed for thread
1
ORA-00289: suggestion : L:\ORACLE\A30\ORAARCH\A30ARCH\ARC60599_0681431456.001
ORA-00280: change 952134239 for thread 1 is in sequence #60599
ORA-00278: log file 'L:\ORACLE\A30\ORAARCH\A30ARCH\ARC60598_0681431456.001' no
longer needed for this recovery
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
ORA-00279: change 952145796 generated at 12/01/2015 06:51:06 needed for thread
1
ORA-00289: suggestion : L:\ORACLE\A30\ORAARCH\A30ARCH\ARC60600_0681431456.001
ORA-00280: change 952145796 for thread 1 is in sequence #60600
ORA-00278: log file 'L:\ORACLE\A30\ORAARCH\A30ARCH\ARC60599_0681431456.001' no
longer needed for this recovery
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
ORA-00279: change 952155617 generated at 12/01/2015 07:51:51 needed for thread
1
ORA-00289: suggestion : L:\ORACLE\A30\ORAARCH\A30ARCH\ARC60601_0681431456.001
ORA-00280: change 952155617 for thread 1 is in sequence #60601
ORA-00278: log file 'L:\ORACLE\A30\ORAARCH\A30ARCH\ARC60600_0681431456.001' no
longer needed for this recovery
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
ORA-00308: cannot open archived log
'L:\ORACLE\A30\ORAARCH\A30ARCH\ARC60601_0681431456.001'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: 'Z:\ORACLE\A30\SAPDATA1\SYSTEM_1\SYSTEM.DATA1'
SQL> ALTER DATABASE ACTIVATE STANDBY DATABASE;
ALTER DATABASE ACTIVATE STANDBY DATABASE
*
ERROR at line 1:
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: 'Z:\ORACLE\A30\SAPDATA1\SYSTEM_1\SYSTEM.DATA1'
I noted after I apply 60598 onwards, it says
ORA-00278: log file 'L:\ORACLE\A30\ORAARCH\A30ARCH\ARC60598_0681431456.001' no longer needed for this recovery
Does it mean 60598 is actually not required for recovery?
Any idea why it is asking for log after 60596?
How do I check what is the last redo log required to complete the recovery?
V$RECOVERY_LOG shows nothing.
Thank you.
Dear Experts, We have installed SAP ERP Quality Assurance on HP UX / Oracle platform. everything is going fine. our sizing is like below: File systems Space(GB) /oracle/SID/saptrace 2 /oracle/SID/sapreorg 5 /oracle/SID/sapdata4 60 /oracle/SID/sapdata3 60 /oracle/SID/sapdata2 60 /oracle/SID/sapdata1 60 /oracle/SID/sapcheck 10 /oracle/SID/sapbackup 10 /oracle/SID/saparch 2 /oracle/SID/origlogB 0.5 /oracle/SID/origlogA 0.5 /oracle/SID/oraarch 40 /oracle/SID/mirrlogB 0.5 /oracle/SID/mirrlogA 0.5 /oracle/SID/112 10 Now my query is is there any recommendation of ratio of Oracle directory file systems sizing ? If yes please let me know. Thanks Asad
Hi guys,
We are in the process to change our hardware and in the same breath with this we upgrade our DB Oracle from 11g to 12c and the OS from Win2k8r2 to Win2k12R2.
The first SAP system was a ERP 607 (FI) (brarchive 742.28) backup runs on Symantec BE11 and runs like a charm.
The second one is a NetWeaver 2004s (BW) (brarchive 721.600) backup runs on HP DataProtector 9.05 and here we have a strange problem:
brarchive starts normally, and creates the *.lst file correctly:
E:\oracle\PRD\oraarch\PRDarch\1_3912_898372107.DBF E:\oracle\PRD\oraarch\PRDarch\1_3913_898372107.DBF E:\oracle\PRD\oraarch\PRDarch\1_3914_898372107.DBF E:\oracle\PRD\oraarch\PRDarch\1_3915_898372107.DBF
*.cds file:
BR0280I BRARCHIVE time stamp: 2015-12-17 18.48.47 BR0229I Calling backup utility with function 'backup'... BR0278I Command output of 'D:\usr\sap\PRD\SYS\exe\nuc\NTAMD64\backint.exe -u PRD -f backup -i E:\oracle\PRD\saparch\.aesbwelq.lst -t file -p D:\oracle\PRD\12102\database\initPRD.utl -c': [Normal] From: OB2BAR_BACKINT@backupserver.com "PRD" Time: 12/17/2015 6:48:47 PM Backint is started with the following parameters: D:\usr\sap\PRD\SYS\exe\nuc\NTAMD64\backint.exe -u PRD -f backup -i E:\oracle\PRD\saparch\.aesbwelq.lst -t file -p D:\oracle\PRD\12102\database \initPRD.utl -c.
On backup server side, the first brarchive job (copy and delete) is saving 16 redo logs is going to timeout, the second job (save) is also saving 16 redo logs get's a timeout and the third job (save config and log files) is saving 695 redo logs from 2.089 and on backup server side the third job get the signal that the job finished correctly!
So and now comes the very strange thing, brarchive saves the redo logs in a random way:
BR0280I BRARCHIVE time stamp: 2015-12-17 22.51.09 #ARCHIVE.. E:\oracle\PRD\oraarch\PRDarch\1_4457_898372107.DBF #SAVED.... 20151217.0045.00 BR0280I BRARCHIVE time stamp: 2015-12-17 22.51.09 #ARCHIVE.. E:\oracle\PRD\oraarch\PRDarch\1_4634_898372107.DBF #SAVED.... 20151217.0045.01 BR0280I BRARCHIVE time stamp: 2015-12-17 22.51.11 #ARCHIVE.. E:\oracle\PRD\oraarch\PRDarch\1_5887_898372107.DBF #SAVED.... 20151217.0045.02 BR0280I BRARCHIVE time stamp: 2015-12-17 22.51.11 #ARCHIVE.. E:\oracle\PRD\oraarch\PRDarch\1_4709_898372107.DBF #SAVED.... 20151217.0045.00
[Normal] From: OB2BAR_BACKINT@backupserver.com "PRD" Time: 12/17/2015 11:05:05 PM Backint exits with the code (1). BR0280I BRARCHIVE time stamp: 2015-12-17 23.05.05 BR0279E Return code from 'D:\usr\sap\PRD\SYS\exe\nuc\NTAMD64\backint.exe -u PRD -f backup -i E:\oracle\PRD\saparch\.aesbwelq.lst -t file -p D:\oracle\PRD\12102\database\initPRD.utl -c': 1 BR0232E 727 of 2089 files saved by backup utility BR0280I BRARCHIVE time stamp: 2015-12-17 23.05.05 BR0231E Backup utility call failed BR0016I 727 offline redolog files processed, total s ze 88143.427 MB
At the Moment, I don't have a second server that is on Win2k12R2 which I can backup on this backup server, so I cannot test another one.
There is no kernel update, or a DBA-Tools update, so I don't know which side (backup server or sap (brarchive)) produces this behavior!
Someone any idea, or has seen this issue before?
Best regards,
Tobias
Hi All,
We are taking the license for SAP ERP Software from the HANA Cloud platform innovation packs
We want to install SAP on Oracle Database. but the thing here we want to achieve this by procuring the Oracle Developer License.
So can we install SAP Server by using Oracle Developer License DB.
Is it technically possible
Is this type of license is acceptable from SAP AG.
Hello,
Can you please suggest me something, this is the error from Provision Manager
An error occurred while processing option SAP NetWeaver 7.0 Support Release 3 > Software Life-Cycle Options > System Copy > Oracle > Target System Installation > Central System > Based on AS ABAP > Central System( Last error reported by the step: TypeError: (new FileMgt()).getNode(cfgInitSidOra.toStringOS(), "true") has no properties (in script NW_ABAP_OneHost|ind|ind|ind|ind, line 103435: ???)). You can now:
Log files are written to C:\Program Files/sapinst_instdir/NW700/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/.
I am doing a system copy from production to test. I did restored and recovered the database, now DB is opened. I ran control.sql script manually. Could it be this the cause of my error, cause I am at step "Oracle Backup/Restore database - control.sql"
Thank you for any suggestion
****************************
Sapinst_dev.log shows this:
A full dump of the javascript code can be found in file js_dump.log in the installation directory.
ERROR 2015-07-14 14:13:53.961 (SRVSID\SIDadm) [ejsglobal.cpp:48] id=ejs.scriptMessage errno=FJS-00003 EJS_ErrorReporter
TypeError: (new FileMgt()).getNode(cfgInitSidOra.toStringOS(), "true") has no properties (in script NW_ABAP_OneHost|ind|ind|ind|ind, line 103435: ???)
ERROR 2015-07-14 14:13:54.008 (SRVSID\SIDadm) [csistepexecute.cpp:1187] id=controller.stepExecuted errno=FCO-00011
The step AdaptInitSidOraFiles with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|onehost|0|NW_CreateDBandLoad|ind|ind|ind|ind|createdbandload|0|NW_CreateDB|ind|ind|ind|ind|createdb|0|NW_OraDBCheck|ind|ind|ind|ind|ora|0|NW_OraDBMain|ind|ind|ind|ind|main|0|NW_OraDBOBR|ind|ind|ind|ind|obr|0|NW_OraOBR|ind|ind|ind|ind|obr|0|ora_obr_control|ind|ind|ind|ind|ora_obr_control|0|AdaptInitSidOraFiles was executed with status ERROR ( Last error reported by the step: TypeError: (new FileMgt()).getNode(cfgInitSidOra.toStringOS(), "true") has no properties (in script NW_ABAP_OneHost|ind|ind|ind|ind, line 103435: ???)).
TRACE 2015-07-14 14:13:54.211 (SRVSID\SIDadm) [syxxcfile.cpp:85] CSyFileImpl::decideIfMoveCopyNode(const CopyMoveDestinationInfo & {m_nodeTypeForCombiCheck: ..., m_path: C:/Program Files/sapinst_instdir/NW700/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/__instana_tmp.1.xml, m_realNodeType: 8}, ISyNode::CopyMoveMode_t 0x3, PSyNodeInt &) const
Target node does not exist and (mode & ISyNode::MISSING) ==> I will copy/move.
TRACE 2015-07-14 14:13:54.211 (SRVSID\SIDadm) [syxxcnode.cpp:425] CSyNodeImpl::move(const CSyPath & C:/Program Files/sapinst_instdir/NW700/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/__instana_tmp.1.xml, ISyNode::CopyMoveMode_t 0x3)
Moved C:/Program Files/sapinst_instdir/NW700/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/__instana_tmp.xml to C:/Program Files/sapinst_instdir/NW700/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/__instana_tmp.1.xml
INFO 2015-07-14 14:13:54.211 (SRVSID\SIDadm) [synxcpath.cpp:799] id=syslib.filesystem.creatingFile CSyPath::createFile()
Creating file C:\Program Files\sapinst_instdir\NW700\LM\COPY\ORA\SYSTEM\CENTRAL\AS-ABAP\__instana_tmp.xml.
TRACE 2015-07-14 14:13:54.711 (SRVSID\SIDadm) [cstatisticmanager.cpp:2226] CStatisticManager::writeInstallationSlanaFile_Intern
TRACE 2015-07-14 14:13:54.711 (SRVSID\SIDadm) [syxxcfile.cpp:85] CSyFileImpl::decideIfMoveCopyNode(const CopyMoveDestinationInfo & {m_nodeTypeForCombiCheck: ..., m_path: C:/Program Files/sapinst_instdir/NW700/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/instslana.1.xml, m_realNodeType: 8}, ISyNode::CopyMoveMode_t 0x3, PSyNodeInt &) const
Target node does not exist and (mode & ISyNode::MISSING) ==> I will copy/move.
TRACE 2015-07-14 14:13:54.711 (SRVSID\SIDadm) [syxxcnode.cpp:425] CSyNodeImpl::move(const CSyPath & C:/Program Files/sapinst_instdir/NW700/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/instslana.1.xml, ISyNode::CopyMoveMode_t 0x3)
Moved C:/Program Files/sapinst_instdir/NW700/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/instslana.xml to C:/Program Files/sapinst_instdir/NW700/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/instslana.1.xml
INFO 2015-07-14 14:13:54.711 (SRVSID\SIDadm) [synxcfile.cpp:149] id=syslib.filesystem.removedFile CSyFileImpl::removeEx(ISyFSErrorHandler * pErrorHandler)
Removed file C:\Program Files\sapinst_instdir\NW700\LM\COPY\ORA\SYSTEM\CENTRAL\AS-ABAP\instslana.xml.
INFO 2015-07-14 14:13:54.711 (SRVSID\SIDadm) [synxcpath.cpp:799] id=syslib.filesystem.creatingFile CSyPath::createFile()
Creating file C:\Program Files\sapinst_instdir\NW700\LM\COPY\ORA\SYSTEM\CENTRAL\AS-ABAP\instslana.xml.
TRACE 2015-07-14 14:13:54.742 (SRVSID\SIDadm) [csistepexecute.cpp:1667]
SAPInst calls the LogInquirer. The output of the LogInquirer can be found in file sapinst_loginquirer.log.
TRACE 2015-07-14 14:13:54.742 (SRVSID\SIDadm) [csistepexecute.cpp:1674]
SAPInst calls the LogInquirer because of an error in execution of step |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|onehost|0|NW_CreateDBandLoad|ind|ind|ind|ind|createdbandload|0|NW_CreateDB|ind|ind|ind|ind|createdb|0|NW_OraDBCheck|ind|ind|ind|ind|ora|0|NW_OraDBMain|ind|ind|ind|ind|main|0|NW_OraDBOBR|ind|ind|ind|ind|obr|0|NW_OraOBR|ind|ind|ind|ind|obr|0|ora_obr_control|ind|ind|ind|ind|ora_obr_control|0|AdaptInitSidOraFiles.
TRACE 2015-07-14 14:13:54.758 (SRVSID\SIDadm) [syxxcfile.cpp:85] CSyFileImpl::decideIfMoveCopyNode(const CopyMoveDestinationInfo & {m_nodeTypeForCombiCheck: ..., m_path: C:/Program Files/sapinst_instdir/NW700/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/sapinst_loginquirer.1.log, m_realNodeType: 8}, ISyNode::CopyMoveMode_t 0x3, PSyNodeInt &) const
Target node does not exist and (mode & ISyNode::MISSING) ==> I will copy/move.
TRACE 2015-07-14 14:13:54.758 (SRVSID\SIDadm) [syxxcnode.cpp:425] CSyNodeImpl::move(const CSyPath & C:/Program Files/sapinst_instdir/NW700/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/sapinst_loginquirer.1.log, ISyNode::CopyMoveMode_t 0x3)
Moved C:/Program Files/sapinst_instdir/NW700/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/sapinst_loginquirer.log to C:/Program Files/sapinst_instdir/NW700/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/sapinst_loginquirer.1.log
TRACE 2015-07-14 14:13:54.789 (SRVSID\SIDadm) [iaxxgenimp.cpp:638] CGuiEngineImp::showMessageBox()
<html> <head> </head> <body> <p> An error occurred while processing option <i>SAP NetWeaver 7.0 Support Release 3 > Software Life-Cycle Options > System Copy > Oracle > Target System Installation > Central System > Based on AS ABAP > Central System( Last error reported by the step: TypeError: (new FileMgt()).getNode(cfgInitSidOra.toStringOS(), "true") has no properties (in script NW_ABAP_OneHost|ind|ind|ind|ind, line 103435: ???))</i>. You can now: </p> <ul> <li> Choose <i>Retry</i><br>to repeat the current step. </li> <li> Choose <i>Log Files</i><br>to get more information about the error. </li> <li> Stop the option and continue later. </li> </ul> <p> Log files are written to C:\Program Files/sapinst_instdir/NW700/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/. </p> </body></html>
TRACE 2015-07-14 14:13:54.789 (SRVSID\SIDadm) [iaxxgenimp.cpp:1035] CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
********************************************************
ERROR 2015-07-14 14:13:53.961 (SRVSID\SIDadm) id=ejs.scriptMessage errno=FJS-00003
TypeError: (new FileMgt()).getNode(cfgInitSidOra.toStringOS(), "true") has no properties (in script NW_ABAP_OneHost|ind|ind|ind|ind, line 103435: ???)
ERROR 2015-07-14 14:13:54.008 (SRVSID\SIDadm) id=controller.stepExecuted errno=FCO-00011
The step AdaptInitSidOraFiles with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|onehost|0|NW_CreateDBandLoad|ind|ind|ind|ind|createdbandload|0|NW_CreateDB|ind|ind|ind|ind|createdb|0|NW_OraDBCheck|ind|ind|ind|ind|ora|0|NW_OraDBMain|ind|ind|ind|ind|main|0|NW_OraDBOBR|ind|ind|ind|ind|obr|0|NW_OraOBR|ind|ind|ind|ind|obr|0|ora_obr_control|ind|ind|ind|ind|ora_obr_control|0|AdaptInitSidOraFiles was executed with status ERROR ( Last error reported by the step: TypeError: (new FileMgt()).getNode(cfgInitSidOra.toStringOS(), "true") has no properties (in script NW_ABAP_OneHost|ind|ind|ind|ind, line 103435: ???)).
INFO 2015-07-14 14:13:54.211 (SRVSID\SIDadm)
Creating file C:\Program Files\sapinst_instdir\NW700\LM\COPY\ORA\SYSTEM\CENTRAL\AS-ABAP\__instana_tmp.xml.
INFO 2015-07-14 14:13:54.711 (SRVSID\SIDadm)
Removed file C:\Program Files\sapinst_instdir\NW700\LM\COPY\ORA\SYSTEM\CENTRAL\AS-ABAP\instslana.xml.
INFO 2015-07-14 14:13:54.711 (SRVSID\SIDadm)
Creating file C:\Program Files\sapinst_instdir\NW700\LM\COPY\ORA\SYSTEM\CENTRAL\AS-ABAP\instslana.xml.
Hello,
We just migrated our SAP systems running on Oracle 11gr2 to new Hardware. Due to this our security team performed an audit of our system and the question of high priority patches came up. Specifically how does SAP handle high priority patches (database and OS) that are released from Oracle and is it possible to apply them immediately before SAP officially certifies them.
Thanks.
Arnie
Hello
I'm performing an Disaster Recovery test of my SAP/ORACLE DB.
In step 8 - Apply Archive log files, I have the problem that the system does not see my archive log files.
The reason is that the brrestore is looking for files:
1_6739_879248014.DBF
My archive logs but are named:
SIDARCH1_6739_879248014.DBF
If I rename the archive files to 1_... (without SIDARCH), brrestore finds them.
I copied the init<SID>.ora from source system.
The parameters are correctly set:
*.log_archive_dest_1='LOCATION=F:\oracle\P01\oraarch\SIDARCH'
*.log_archive_format='%t_%s_%r.dbf'
Why is brrestore looking for the wrong file name?
Thanks and regards
Marco
Hi Colleagues,
Please help me to find the root cause of the very slow running table import with R3trans using control file.
The table contains about 5.5 million entries (rows) and it was exported from a prod. SAP system (running on Oracle 12c).
Now I am importing it with R3trans into the test system which is running also on Oracle 12c.
The size of the dump file is only 30 MB, so contains not huge amount of data.
Database is running on AIX 6.1 and server has 50 GB memory and 3 CPU.
I started the import 60 hours ago and only 2 million entries imported until now, so based on my calculation the whole import will takes 7 days
I also checked a smaller table which was already imported, and don't really understand the row: "Duration: 7:14:48 h (112 bytes/sec)".
4 ETW690 COMMIT "128000" "31488000"
4 ETW690 COMMIT "128000" "31616000"
4 ETW000 495833 entries for ZARIXCO001 inserted (___).
4 ETW690 COMMIT "117312" "31733312"
4 ETW675 end import of " 000000R3TRCNTDZARIXCO001".
4 ETW000 0 tables in P-buffer synchronized.
4 ETW000 0 tables in R-buffer synchronized.
4 ETW690 COMMIT "0" "31733312"
4 ETW000 2941540 bytes read.
4 ETW000 Transport overhead 0.0 %.
4 ETW000 Duration: 7:14:48 h (112 bytes/sec).
3 ETW710 "1" "1"
Is there any way to speed the import up?
I never saw such slow speed before.
Many thanks in advance for any help / clue / ideas.
Krisztian
Hi All,
We are installing SAP on Microsoft Cluster (Two node). While installing OFS. While installing Oracle Fail Safe Software (version-4.1) getting error during registering cluster.
Error: -
INFO: Command = Oracle.FailSafe.ServerConfig.exe Register -quiet
Error getting cluster name resource
The network name cannot be found.
I am attaching OFS installation log also with this thread. Please suggest if some face similar issues.
Regards,
Jithin
Dear experts
We are upgraded to our oracle database from 10.2.0.5 to oracle 12.1.0.2 operating system Suse Linux enterprise 11SP4 and SAP kernel version 722EXT
( also upgrade Kernel from 701 SP 150 )our Abap version and Basis Version is SAP_ABA 701 0010 SAPKA70110 and SAP_BASIS 701 0010 SAPKB70110 .
1. after upgrade oracle we have many dumps in st22 DDIC_TYPELENG_INCONSISTENT
2. is oracle 12c supported with ECC6.0 EHP1 ( Because as per sap document sap kernel version 7.1 EXT minimum require ) kindly also guide related to our current sap version with oracle 12c.
we have to down times given by management for upgrade we are plan to upgrade our current sap to EHP7 ( EHP7 not supported to oracle 10.2 ) so this is mandatory to upgrade sap database with SSFS in step one we upgrade oracle database and implement SSFS authentication . then after one month we have 2nd down time then we upgrade to EHP7.
Best Regards
Hi All,
I know this is an old topic but still I wish to bring this in as I am unable to figure out by myself what the issue would be.
I did Kernel patch upgrade from 741 PL 15 to 110.
After that DB check and update stats are failing with the below log.
Job started
Step 001 started (program RSDBAJOB, variant &0000000000001, user ID DDIC)
Execute logical command BRCONNECT On host SAPHR
Parameters: -jid CHECK20150217024618 -u / -c -f check
BR0801I BRCONNECT 7.40 (12)
BR0805I Start of BRCONNECT processing: cepwngil.chk 2015-02-17 02:46:19
BR0252E Function fopen() failed for '/oracle/SID/sapcheck/cepwngil.chk' at location main-5
BR0253E errno 13: Permission denied
BR0121E Processing of log file /oracle/SID/sapcheck/cepwngil.chk failed
BR0806I End of BRCONNECT processing: cepwngil.chk2015-02-17 02:46:19
BR0280I BRCONNECT time stamp: 2015-02-17 02:46:19
BR0804I BRCONNECT terminated with errors
External program terminated with exit code 3
BRCONNECT returned error status E
Job finished
Anyhow after Kernel upgrade I ran saproot.sh so all the brtools exe's permissions were set right.
-rwsrwxr-- 1 orasid sapsys 13542030 Nov 1 15:47 brbackup
-rwsrwxr-- 1 orasid sapsys 13385793 Nov 1 15:47 brarchive
-rwsrwxr-- 1 orasid sapsys 15952052 Nov 1 15:47 brconnect
-rwxr-xr-x 1 sidadm sapsys 16806620 Nov 1 15:47 brspace
-rwxr-xr-x 1 sidadm sapsys 14249766 Nov 1 15:46 brrecover
-rwxr-xr-x 1 sidadm sapsys 5847113 Nov 1 15:32 brrestore
-rwxr-xr-x 1 sidadm sapsys 6740867 Nov 1 15:32 brtools
Then after further troubleshooting found that SYSTEM password was locked which I found after triggering brconnect db check at Server level.
BR0801I BRCONNECT 7.40 (12)
BR0805I Start of BRCONNECT processing: cepwnoel.chk 2015-02-17 04:14:43
BR0484I BRCONNECT log file: /oracle/SID/sapcheck/cepwnoel.chk
BR0280I BRCONNECT time stamp: 2015-02-17 04:14:47
BR0301E SQL error -1017 at location db_connect-3, SQL statement:
'CONNECT system/*******'
ORA-01017: invalid username/password; logon denied
BR0310E Connect to database instance SID failed
BR0280I BRCONNECT time stamp: 2015-02-17 04:14:50
BR0301E SQL error -1017 at location db_connect-3, SQL statement:
'CONNECT system/*******'
ORA-01017: invalid username/password; logon denied
BR0310E Connect to database instance SID failed
BR0806I End of BRCONNECT processing: cepwnoel.chk 2015-02-17 04:14:47
BR0280I BRCONNECT time stamp: 2015-02-17 04:14:50
BR0804I BRCONNECT terminated with errors
So unlocked and updated the password thru brconnect below command.
brconnect -c -u / -p init%ORACLE_SID%.sap -f chpass -o SYSTEM -password new password
But still facing the issue as brconnect check DB command fails and locks the SYSTEM password.
Any suggestions would be very much valuable to me.
Please respond.
Thanks...
