Dear Experts,

I'm getting too much Oracle trace files with extensions .trc and trm being generated in following locations

D:\oracle\diag\rdbms\qas\qas\trace

file names are as follows :

qas_dbrm_3412              TRC file

qas_dbrm_3412.trm        TRM file.

Environment :

Trace file D:\ORACLE\diag\rdbms\qas\qas\trace\qas_cjq0_688.trc

Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production

With the Partitioning, OLAP, Data Mining and Real Application Testing options

Windows NT Version V6.1 Service Pack 1

CPU                 : 8 - type 8664, 8 Physical Cores

Process Affinity    : 0x0x0000000000000000

Memory (Avail/Total): Ph:26538M/32767M, Ph+PgF:8839M/53245M

VM name             : VMWare Version (6)

Instance name: qas

Redo thread mounted by this instance: 0 <none>

Oracle process number: 0

Windows thread id: 688, image: ORACLE.EXE (CJQ0)

Kind Regards,

Mohammed Nayeem

few questions

COnversion NON ASM to ASM storage 11g + 12c

Q1 : Since it is fresh grid install, can I go for 12c grid for standalone (single instance) and can still use 11g DB to use ASM storage??

Q2 : As far as , s/w owner, oracle is required grid s/w owner  for 12c, is it also true for DB s/w owner 12c (if going forward I upgrade to 12c)

If that is the case , My intention / step is to

install 12 grid for standalone ASM instance as oracle user

install 11g on this server as oracle user

create dataguard of my primary DB to this server (and convert NON ASM files to ASM Files)

install 12c DB s/w primary DB node as oracle user 

make a switch and upgrade DB to 12c on new server (which was serving as standby and was on ASM)

Q3 : anything that is needed to chnage when orasid changes to oracle as part of this upgrade or conversion?

Hello,

I'm installing a new system (system copy) and during the second phase (after data recovery) I get the following error message :

ERROR 2015-11-12 11:34:17.926

CJS-30023  Process call 'F:\usr\sap\SID\SYS\exe\uc\NTAMD64\saplicense.exe -R3Setup SID XXXXXX TRACE=2' exits with error code -2. For details see log file(s) saplicense.log, dev_slic.

In fact, I know this issue and usually I solve it by changing password of dtabase user using brconnect. But for an unexpecting reason, this time that doesn't work. However, I use the same procedure which run usualy.

Dev_slic log give me the following information :

---------------------------------------------------

trc file: "dev_slic", trc level: 2, release: "701"

---------------------------------------------------

SlicIGetDate: <20151112>

SlicPwForR3Setup: calc password out of <SID20151112FJAWFNLTL>

SlicIGetDate: <20151112>

SlicSapInstall: sysname: >SID< connect: >1< rollback: >1<

SlicIDbLock: first call to SlicIDbLock: initialize Mutex

db_con_init called

create_con (con_name=R/3)

Loading DB library 'dboraslib.dll' ...

DlLoadLib success: LoadLibrary("dboraslib.dll"), hdl 0, addr 0000000187260000

    using "F:\usr\sap\SID\SYS\exe\uc\NTAMD64\dboraslib.dll"

Library 'dboraslib.dll' loaded

function DbSlExpFuns loaded from library dboraslib.dll

Version of 'dboraslib.dll' is "700.08", patchlevel (0.186)

function dsql_db_init loaded from library dboraslib.dll

function dbdd_exp_funs loaded from library dboraslib.dll

New connection 0 created

000: name = R/3, con_id = -000000001, state = DISCONNECTED, tx = NO , hc = NO , perm = YES,

     reco = NO , frco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO

db_con_connect (con_name=R/3)

find_con_by_name found the following connection for reuse:

000: name = R/3, con_id = 000000000, state = DISCONNECTED, tx = NO , hc = NO , perm = YES,

     reco = NO , frco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO

CLIENT_ORACLE_HOME is not set as environment variable or

DIR_CLIENT_ORAHOME is not set as profile parameter.

  assuming using instant client with unspecified location.

-->oci_init1

Oracle Client Version: '10.2.0.4.0', (dbsl 701 110412, non-unicode)

  Default connection: tnsname ='SID'

-->oci_initialize(con=0, char='WE8DEC', nchar='AL16UTF16', uc_ln=1)

Application info callback registered.

OCIEnvCreate(mode=0=OCI_DEFAULT) returned 0 (for default NLS handle)

   OCIHandleAlloc(OCI_HTYPE_ERROR, con=0, ErrHp=000000000276F820)

   OCIHandleAlloc(OCI_HTYPE_ERROR, con=0, ErrBt=0000000002770FD8)

NLS env.: lang=414D45524943414E

          terr=414D4552494341

          char=55544638

Client NLS setting (by OCINlsGetInfo): con=0, 'AMERICAN_AMERICA.UTF8'

charset='WE8DEC', ncharset='AL16UTF16', UNI_ASC=FALSE

   default client setting: NLS_CHAR=charset='UTF8'

Logon as OPS$-user to get SAPSR3's password

Connecting as /@SID on connection 0 (nls 0) ... (dbsl 701 110412, non-unicode)

Allocating service context handle for con=0

Allocating server context handle

Attaching to DB Server SID (con=0,svchp=0000000002770E98,srvhp=0000000002771708)

Assigning server context 0000000002771708 to service context 0000000002770E98

Allocating user session handle

Starting user session: OCISessionBegin(con=0, usr='/',svchp=0000000002770E98, srvhp=0000000002771708, usrhp=000000000277E2F0)

Assigning user session 000000000277E2F0 to service context 0000000002770E98

-->oci_prepare_stmt(con=0, len=52, stp=000000000277B148)

       BEGIN DBMS_APPLICATION_INFO.SET_MODULE(:A0,:A1);END;                                                                     

-  oci_bind   ( 0: SQLT_STR, l=300, con=0, stp=000000000277B148, vp=000000018751DC00,ip=000000018741C768,rlp=0000000000000000,rcp=0000000000000000)

-  oci_bind   ( 1: SQLT_STR, l=300, con=0, stp=000000000277B148, vp=000000018751EDD0,ip=000000018741C76A,rlp=0000000000000000,rcp=0000000000000000)

   CbApplInfoGet() failed (ignored 1).

-->oci_prepare_stmt(con=0, len=54, stp=000000000277C1A0)

       BEGIN DBMS_APPLICATION_INFO.SET_CLIENT_INFO(:A0); END;                                                                   

-  oci_bind   ( 0: SQLT_STR, l= 20, con=0, stp=000000000277C1A0, vp=000000018751C770,ip=0000000000000000,rlp=0000000000000000,rcp=0000000000000000)

-->oci_execute_stmt(con=0, stp=000000000277C1A0, iters=1, rowoff=0, dml_batch_errors=0)

<--oci_execute_stmt(rc=0, iters-errors = 1-0) [time 0,000s]

-->oci_prepare_stmt(con=0, len=0, stp=000000000277C1A0)

       SELECT SID FROM V$MYSTAT WHERE ROWNUM<2                                                                                  

-->oci_define ( 0: SQLT_INT, l=  4, con=0, stp=000000000277C1A0, vp=000000000202F6F0,ip=000000000202F6E8,rlp=0000000000000000,rcp=0000000000000000)

-->oci_execute_stmt(con=0, stp=000000000277C1A0, iters=1, rowoff=0, dml_batch_errors=0)

<--oci_execute_stmt(rc=0, iters-errors = 1-0) [time 0,000s]

Now '/@SID' is connected: con=0, nls_hdl=0, session_id=23.

-->oci_prepare_stmt(con=0, len=0, stp=000000000277C1A0)

       ALTER SESSION SET NLS_SORT = BINARY                                                                                      

-->oci_execute_stmt(con=0, stp=000000000277C1A0, iters=1, rowoff=0, dml_batch_errors=0)

<--oci_execute_stmt(rc=0, iters-errors = 1-0) [time 0,000s]

-->oci_prepare_stmt(con=0, len=0, stp=000000000277C1A0)

       SELECT USERID,PASSWD FROM SAPUSER WHERE USERID IN (:A0,:A1)                                                              

-  oci_bind   ( 0: SQLT_STR, l=256, con=0, stp=000000000277C1A0, vp=0000000187571E5C,ip=0000000000000000,rlp=0000000000000000,rcp=0000000000000000)

-  oci_bind   ( 1: SQLT_STR, l=256, con=0, stp=000000000277C1A0, vp=000000000202F640,ip=0000000000000000,rlp=0000000000000000,rcp=0000000000000000)

-->oci_define ( 0: SQLT_STR, l=256, con=0, stp=000000000277C1A0, vp=000000000202F740,ip=000000000202F888,rlp=0000000000000000,rcp=0000000000000000)

-->oci_define ( 1: SQLT_AFC, l=256, con=0, stp=000000000277C1A0, vp=000000000202F540,ip=000000000202F334,rlp=0000000000000000,rcp=0000000000000000)

-->oci_execute_stmt(con=0, stp=000000000277C1A0, iters=1, rowoff=0, dml_batch_errors=0)

<--oci_execute_stmt(rc=0, iters-errors = 1-0) [time 0,000s]

Got SAPSR3's password from OPS$-user

Disconnecting from connection 0 ...

Rolling back transaction ...

Closing user session (con=0,svchp=0000000002770E98,usrhp=000000000277E2F0)

Disconnected (con=0) from ORACLE.

Connect as 'SAPSR3' with found password from table SAPUSER

Connecting as SAPSR3/<pwd>@SID on connection 0 (nls 0) ... (dbsl 701 110412, non-unicode)

Assigning username to user session: con=0, usrhp=000000000277E2F0

Assigning password to user session: con=0, usrhp=000000000277E2F0

Starting user session: OCISessionBegin(con=0, usr=SAPSR3/<pwd>, svchp=0000000002770E98, srvhp=0000000002771708, usrhp=000000000277E2F0)

   OCISessionBegin(OCI_DEFAULT) failed with -1=OCI_ERROR

   OCISessionBegin(OCI_DEFAULT) failed with SQL error 1005:

   ORA-01005: null password given; logon denied                                                                             

server_detach(con=0,stale=1,svrhp=0000000002771708)

Detaching from DB Server (con=0,svchp=0000000002770E98,srvhp=0000000002771708)

Deallocating server context handle 0000000002771708 from con=0

*** ERROR => CONNECT failed with sql error '1005' [dbsloci.c    11306]

   set_ocica() -> SQL error code 1005

-->oci_get_errmsg (con=0, rc=1005)

   OCIErrorGet -> SQL error code: 1005

   ORA-01005: null password given; logon denied                                                                             

  Default connection: tnsname ='SID'

Nls CharacterSet                      NationalCharSet                        EnvHp      ErrHp      ErrBt

  0 UTF8                              AL16UTF16                         0000000002767D30 000000000276F820 0000000002770FD8

-->oci_initialize(con=0, char='UTF8', nchar='AL16UTF16', uc_ln=1)

Application info callback registered.

Logon as OPS$-user to get SAPSR3's password

Connecting as /@SID on connection 0 (nls 0) ... (dbsl 701 110412, non-unicode)

Allocating server context handle

Attaching to DB Server SID (con=0,svchp=0000000002770E98,srvhp=0000000002771708)

Assigning server context 0000000002771708 to service context 0000000002770E98

Starting user session: OCISessionBegin(con=0, usr='/',svchp=0000000002770E98, srvhp=0000000002771708, usrhp=000000000277E2F0)

Assigning user session 000000000277E2F0 to service context 0000000002770E98

-->oci_prepare_stmt(con=0, len=52, stp=000000000277A0F0)

       BEGIN DBMS_APPLICATION_INFO.SET_MODULE(:A0,:A1);END;                                                                     

-  oci_bind   ( 0: SQLT_STR, l=300, con=0, stp=000000000277A0F0, vp=000000018751DC00,ip=000000018741C768,rlp=0000000000000000,rcp=0000000000000000)

-  oci_bind   ( 1: SQLT_STR, l=300, con=0, stp=000000000277A0F0, vp=000000018751EDD0,ip=000000018741C76A,rlp=0000000000000000,rcp=0000000000000000)

-->oci_prepare_stmt(con=0, len=54, stp=0000000002770778)

       BEGIN DBMS_APPLICATION_INFO.SET_CLIENT_INFO(:A0); END;                                                                   

-  oci_bind   ( 0: SQLT_STR, l= 20, con=0, stp=0000000002770778, vp=000000018751C770,ip=0000000000000000,rlp=0000000000000000,rcp=0000000000000000)

-->oci_execute_stmt(con=0, stp=0000000002770778, iters=1, rowoff=0, dml_batch_errors=0)

<--oci_execute_stmt(rc=0, iters-errors = 1-0) [time 0,000s]

-->oci_prepare_stmt(con=0, len=0, stp=0000000002770778)

       SELECT SID FROM V$MYSTAT WHERE ROWNUM<2                                                                                  

-->oci_define ( 0: SQLT_INT, l=  4, con=0, stp=0000000002770778, vp=000000000202F260,ip=000000000202F258,rlp=0000000000000000,rcp=0000000000000000)

-->oci_execute_stmt(con=0, stp=0000000002770778, iters=1, rowoff=0, dml_batch_errors=0)

<--oci_execute_stmt(rc=0, iters-errors = 1-0) [time 0,000s]

Now '/@SID' is connected: con=0, nls_hdl=0, session_id=23.

-->oci_prepare_stmt(con=0, len=0, stp=0000000002770778)

       ALTER SESSION SET NLS_SORT = BINARY                                                                                      

-->oci_execute_stmt(con=0, stp=0000000002770778, iters=1, rowoff=0, dml_batch_errors=0)

<--oci_execute_stmt(rc=0, iters-errors = 1-0) [time 0,000s]

-->oci_prepare_stmt(con=0, len=0, stp=0000000002770778)

       SELECT USERID,PASSWD FROM SAPUSER WHERE USERID IN (:A0,:A1)                                                              

-  oci_bind   ( 0: SQLT_STR, l=256, con=0, stp=0000000002770778, vp=0000000187571E5C,ip=0000000000000000,rlp=0000000000000000,rcp=0000000000000000)

-  oci_bind   ( 1: SQLT_STR, l=256, con=0, stp=0000000002770778, vp=000000000202F1B0,ip=0000000000000000,rlp=0000000000000000,rcp=0000000000000000)

-->oci_define ( 0: SQLT_STR, l=256, con=0, stp=0000000002770778, vp=000000000202F2B0,ip=000000000202F3F8,rlp=0000000000000000,rcp=0000000000000000)

-->oci_define ( 1: SQLT_AFC, l=256, con=0, stp=0000000002770778, vp=000000000202F0B0,ip=000000000202EEA4,rlp=0000000000000000,rcp=0000000000000000)

-->oci_execute_stmt(con=0, stp=0000000002770778, iters=1, rowoff=0, dml_batch_errors=0)

<--oci_execute_stmt(rc=0, iters-errors = 1-0) [time 0,000s]

Got SAPSR3's password from OPS$-user

Disconnecting from connection 0 ...

Rolling back transaction ...

Closing user session (con=0,svchp=0000000002770E98,usrhp=000000000277E2F0)

Disconnected (con=0) from ORACLE.

Connect as 'SAPSR3' with found password from table SAPUSER

Connecting as SAPSR3/<pwd>@SID on connection 0 (nls 0) ... (dbsl 701 110412, non-unicode)

Assigning username to user session: con=0, usrhp=000000000277E2F0

Assigning password to user session: con=0, usrhp=000000000277E2F0

Starting user session: OCISessionBegin(con=0, usr=SAPSR3/<pwd>, svchp=0000000002770E98, srvhp=0000000002771708, usrhp=000000000277E2F0)

   OCISessionBegin(OCI_DEFAULT) failed with -1=OCI_ERROR

   OCISessionBegin(OCI_DEFAULT) failed with SQL error 1005:

   ORA-01005: null password given; logon denied                                                                             

server_detach(con=0,stale=1,svrhp=0000000002771708)

Detaching from DB Server (con=0,svchp=0000000002770E98,srvhp=0000000002771708)

Deallocating server context handle 0000000002771708 from con=0

*** ERROR => CONNECT failed with sql error '1005' [dbsloci.c    11306]

   set_ocica() -> SQL error code 1005

-->oci_get_errmsg (con=0, rc=1005)

   OCIErrorGet -> SQL error code: 1005

   ORA-01005: null password given; logon denied                                                                             

*****************************************************************************

*

*  ERROR       Connect to database failed

*

*  TIME        Thu Nov 12 11:34:17 2015

*  RELEASE     701

*  COMPONENT   SLIC

*  VERSION     302

*  RC          99

*  MODULE      slicdb.c

*  LINE        151

*  DETAIL      DbSlConnect failed with return code 99

*              SQL-ERROR 1005 (check DB manual for explanation)

*  COUNTER     1

*

*****************************************************************************

For more information, see https://t.co/r0d5800nZw.

Hi Experts,

I wanted to know what are the differences in refresh of different abap systems with oracle as the database. Like, what processes are different in pre and post refresh tasks for BW, CRM, SRM, SCM, ECC etc.

Please advice.

Thanks,

Asad

Dear experts,

While performing transport to production, we are facing below error

Message no. TW169

Diagnosis

R3trans cannot logon to the database.

System Response

The program is cancelled.

Procedure

In the R3trans log you will find an SQL error number, which gives you the cause of the error.

Environment variables not set (or incorrectly set) are the most frequent reason for the error

BR,

Fadzly Iqbal

Hi,

We are facing an issue regarding an event triggered job SAP_CCMS_MONI_BATCH_STARTUP_DP.

Details of the job

-

ABAP Program -> RSAL_BATCH_TOOL_STARTUPDISP

User -> DDIC

Job Frequency -> Event Periodic

Event -> SAP_MONITORING_STARTUP_DISPATCH

We performed Database Refresh and this job has come from Source System. We have deleted the job in Target System but after that also we are getting continuous error message in SM21.

Error message is as follows:

14:33:36 DIA  001 000 SAPSYS                EA  S Failed to reschedule a periodic job

14:33:36 DIA  001 000 SAPSYS                EB  C > Job SAP_CCMS_MONI_BATCH_STARTUP_DP

On digging down we got the below information in SM21 regarding the error:

Documentation for system log message EA S :

-

This message is output by one of the job schedulers active in the

system (e.g. time or event-based scheduler). It indicates a problem

related to the database. An attempt was made to reschedule a periodic

job and write the respective control data in the database. This error

occurred for one of the associated database operations (for example,

INSERT or UPDATE).

Another cause of the error is failure to generate a new job ID number.

A subsequent message will point this out.

The following courses of action are possible:

Check whether there are any other notes on this problem next to this

message in the system log, for example direct messages from the

database interface. These details generally bring you closer to the

actual cause of the problem.

The additional information for this message contains the name of the

database table for which the error occurred.

If you determine that the error occurred during the SELECT access to

table TBTCI, the internal report belonging to this background job has

been deleted. In this case, there is normally a background job in the

'terminated' status, which ended due to runtime error

'LOAD_PROGRAM_NOT_FOUND'. Delete this job to prevent further

unnecessary scheduling on the part of the background processing

scheduler. You must then reschedule the job concerned.

As rescheduling of the periodic job could not be completed

successfully, this job is not executed at first. The background

processing scheduler takes this job and attempts to schedule it again.

Depending on the repetition period, gaps in running the background jobs

can occur for successful scheduling (i.e. the background jobs that were

unsuccessfully scheduled will be missing in the job overview if their

execution date elapsed in the meantime).

Since the next start of the periodic job could not be scheduled

correctly, there is no entry in the job overview for the planned start

date.

If the system failed to generate the job ID number, you will find notes

on what to do next in the long text of the respective system log

message.

We have fixed also Background Object in SM61.

Kindly help to fix this issue. Looking forward for reply.

Thanks,

Soumya

Dear Experts ,

can some one guide me from where i can find the exact values over a period of months for sequential/random disk (Input/ouput) reads and writes , i have searched on st03n >> workload >> database there i can see no of sequential read and direct access , i could sum up these values and get the required values for read at least but when i compare them to the data i get from st04 it somehow does not match

for st04 i can see much more number of physical reads ,i am assuming the sum of sequential reads and #accesses from st03n should sum up to the physical read field from st04

can anyone please support

Best Regards,

Shubham Jain

Hi SAP gurus,

Can you tell the o/s  or  TP  command  to  Add   Transport Request to import Queue all at a time which are available in co files directory   ,

Because I have to add 500- 600 request .  For every request I canu2019t  do like this  STMS_IMPORT  -- Extras=> other requests -add--

Thanks and regards

babu

Hi,

We have a customer who is interested in moving their existing infrastructure to an Active Active Database configuration, they have several SAP systems including ECC, CRM and PI. They currently have an Oracle database clustered in one data center and then use Oracle Data Guard to replicate the database into a 2nd DC. Now they want to configure the Database as Active Active across the data centers, they want always on set up, just in case they lose one of the DC's so that they wont lose the database for the minutes to hours for fail over to the 2nd DC that they currently have.

We are looking at Extended RAC across the DC's but this will also mean additional Network upgrades so its looking quite expensive, any other options?

thanks

Simon. 

Hi Experts,

     How can I add additional log archive destination which is remote server.

     I tried to use the following below but i throws me an error. please help

    SQL>alter database noarchivelog;

    SQL>shutdown immediate

    SQL>startup

    SQL>alter system set log_archive_dest_1='Service=PRD_Z' scope=spfile;

    SQL>shutdown immediate

    SQL>startup mount

     ORA-16019: cannot use LOG_ARCHIVE_DEST_2 with LOG_ARCHIVE_DEST or LOG_ARCHIVE_DU

     PLEX_DEST

     or my procedures are wrong? please help me or tell me how to add additional archive destination(remote server)

thanks

Hello,

we are facing following Problem: While upgradeing of our SLD (Netweaver PI 7.1 Dual-Stack) to Netweaver 7.4 Dual-Stack with SUM check:

PREP_INPUT_CHECK/SELSTACKXML_ASK failes with output:

Last error code set: Stack configuration not useable: The stack configuration is not valid for the system

I generated the stack.xml file with Mopz and it ist located in the directory with the Upgrade Packages.

I searched in various posts with the same error for example:

Error when upgrading an SRM System 5.5 to SRM 7... | SCN

But the System-Number is correct and in the xml file and in lmdb too.

The verification check in LMDB is green.

Can anybody help me ?

Thanks

Lukas

Dear Experts, we are about to make a decision between SYMANTEC Exec and HP DataProtector for our SAP on Oracle+Windows, could you guys please tell us which is best and why ?

Kindest Regards,

Domnic

Dear All,

We are installing SAP ECC 6 on Hp Unix 11.31 for Testing purpose. Database is Oracle 10.2.0.1.0.

sapinst throws the error related to listner. Listener is not able to start.

I have try to start manully using ora<sid> userid it also gives following error. I have set the permission on /vat/tmp/.oracle. It ok now but following error remain same.

LSNRCTL for HPUX: Version 10.2.0.1.0 - Production on 30-AUG-2012 18:06:43

Copyright (c) 1991, 2005, Oracle.  All rights reserved.

Starting /oracle/PRD/102_64/bin/tnslsnr: please wait...

TNSLSNR for HPUX: Version 10.2.0.1.0 - Production

System parameter file is /oracle/PRD/102_64/network/admin/listener.ora

Log messages written to /oracle/PRD/102_64/network/log/listener.log

Error listening on: (ADDRESS=(PROTOCOL=IPC)(KEY=PRD.WORLD))

TNS-12555: TNS:permission denied

TNS-12560: TNS:protocol adapter error

  TNS-00525: Insufficient privilege for operation

   HPUX Error: 1: Not owner

Listener failed to start. See the error message(s) above...

Thanks in advance,

Nirav

Hi,

I want to know that how can we call a stored procedure with the use of stored procedure in oracle database. Can anyone provide documentation on what is this functionality and how it can work with SMP?

Thanks,

Hello All,

We are planning to do online table reorg for the following compressed tables EDIDS, EDIDC, EDI40.

Please confirm whether we can do online table reorg for the compressed tables.

Could you please shares to do the same .

Regards

Subb

Hello! I have some questions about SQL Command Editor (oracle 11g/12c - nw701.12).

1) Why is this command with parse error (F7), but runs fine (F8)?

select distinct USER_ADDR.BNAME, USER_ADDR.NAME_TEXTC from USER_ADDR, USR02, PA0105 where USR02.MANDT = '123' and USR02.GLTGB = '00000000' and USR02.USTYP = 'A' and USR02.UFLAG = '0' and USR02.BNAME = PA0105.USRID and USER_ADDR.BNAME = USR02.BNAME and USR02.BNAME in (select PA0105.USRID from PA0105, PA0000 where PA0105.SUBTY = '0007' and PA0105.MANDT = '123' and PA0000.MASSN = '09' and to_number(PA0000.BEGDA) < to_number(to_char(ADD_MONTHS(SYSDATE, -1), 'YYYYMMDD')) and PA0000.ENDDA = '99991231' and PA0000.MANDT = '123' and PA0105.PERNR = PA0000.PERNR) and USR02.BNAME not in ('XYZ') and USR02.BNAME not in ('ABC') order by USER_ADDR.BNAME

2) Why is this command with parse error (F7), but runs fine (F8)?

select distinct PA0105.USRID, PA0105.PERNR from PA0105, (select PA0105.USRID from PA0105 where PA0105.SUBTY = '0007' and PA0105.MANDT = '123' group by PA0105.USRID having count(distinct PA0105.PERNR) > '1') A where A.USRID = PA0105.USRID

minus

select PA0105.USRID, PA0105.PERNR from PA0105, PA0000, (select PA0105.USRID from PA0105, PA0000 where PA0105.SUBTY = '0007' and PA0105.MANDT = '123' and PA0000.MANDT = '123' and PA0105.PERNR = PA0000.PERNR group by PA0105.USRID having count(distinct PA0000.PERNR) > '1') A where PA0000.MASSN = '09' and to_number(PA0000.BEGDA) < to_number(to_char(SYSDATE, 'YYYYMMDD')) and PA0000.ENDDA = '99991231' and A.USRID = PA0105.USRID and PA0105.PERNR = PA0000.PERNR order by USRID, PERNR

3) Sometimes I try tocombine (set operations) three commands that work, but results in an error(ERROR_IN_SET_OPERATOR).

Hi All,

Our SAP instance is terminating with the following error.

I have checked with the note 1966321, it says that to do the latest kernel patch.

Our kernel patch is 2 years old.

The system was running fine without any issue.

I need to know whether the kernel patch will do the trick?

Regards,

Karthik.R

HI Experts,

recently we planed to migrate our central instance to H.A platform using oracle 11g and ASM technology, in our test environment migration done without error but in our Disaster recover plan we faced some issue in database backup and recover phase.

we used DB13 to create back with "Online Backup + Redo log" action, also in our initSID.sap we have change following parameters:

backup_mode = full

backup_type = online_cons

backup_dev_type = disk

but at the end of backup when we tried to restore backup files we faced many problems and after all troubleshooting we find this in backup problem:

BR0051I BRBACKUP 7.20 (42)

BR0055I Start of database backup: beshvxyw.fnd 2016-01-18 13.43.14

BR0484I BRBACKUP log file: /oracle/XXX/sapbackup/beshvxyw.fnd

BR0477I Oracle pfile /oracle/XXX/sapprof/initXXX002.ora created from spfile /oracle/XXX/112/dbs/spfileXXX002.ora

BR1805I Oracle spfile /oracle/XXX/sapprof/spfileXXX.ora created from pfile /oracle/XXX/sapprof/initXXX002.ora

BR0280I BRBACKUP time stamp: 2016-01-18 13.43.14

BR1351I Configuration of database services:

BR0280I BRBACKUP time stamp: 2016-01-18 13.43.15

BR1352I Status of database services:

BR0101I Parameters

 

 

Name                           Value

 

 

oracle_sid                     XXX002

oracle_home                    /oracle/XXX/112

oracle_profile                 /oracle/XXX/sapprof/initXXX002.ora

oracle_spfile                  +DATA/XXX/spfileXXX.ora

sapdata_home                   /oracle/XXX

sap_profile                    /oracle/XXX/sapprof/initXXX.sap

backup_mode                    FULL

backup_type                    online

backup_dev_type                disk

backup_root_dir                /backup

disk_copy_cmd                  rman

cpio_disk_flags                -pdcu

exec_parallel                  0

parallel_instances             XXX001:/oracle/XXX/112@XXX001,

                               XXX002:/oracle/XXX/112@XXX002

db_services                    yes

asm_ora_sid                    +ASM2

asm_ora_home                   /u01/app/11.2.0/grid/

asm_root_dir                   ASM

_rem_sql_call                  yes

system_info                    XXXadm/oracle d2er Linux 3.8.13-16.2.1.el6uek.x86_64 #1 SMP Thu Nov 7 17:01:44 PST 2013 x86_64

oracle_info                    XXX 11.2.0.3.0 8192 484 122278013 d2er UTF8 UTF8 3022392578 &XXX

sap_info                       702 SAPSR3 XXX K1431315896 R3_BASIS 0020676399

make_info                      linuxx86_64 OCI_102 Mar 30 2015 720_REL

command_line                   brbackup -u / -jid FLLOG20160118134313 -c force -t online -m full -p initXXX.sap -a -c force -p initXXX.sap -sd

br_env                         SAPSYSTEMNAME=XXX,

                               DIR_LIBRARY=/usr/sap/XXX/SYS/exe/run,

                               SAPEXE=/usr/sap/XXX/SYS/exe/run,

                               DB_SID=XXX,

                               ORACLE_SID=XXX002,

                               ORACLE_BASE=/oracle,

                               TNS_ADMIN=/usr/sap/XXX/SYS/profile/oracle,

                               ORACLE_HOME=/oracle/XXX/112,

                               NLS_LANG=AMERICAN_AMERICA.UTF8,

                               SAPDATA_HOME=/oracle/XXX,

                               BR_RSH_CMD=/usr/bin/ssh,

                               BR_RCP_CMD=/usr/bin/scp,

                               BR_RSC=1

as it is highlighted in text above backup_type is "online" and it is look like this parameter have changed!

would you please help me to create ONLINE_CONS backup using DB13.

Regards,

ALI.

Experts,

I'm certainly not a DBA (I'm a basis guy with limited DBA skills), but I was wondering if anyone out there has used oracle advanced compression on any oracle DBs that are running SAP.  We have ECC6.0/CRM7.0/BW7.02/PI7.11 systems all running oracle 11g. 

Our DBA team is considering buying the oracle advanced compression product.  We've been told it could save us 60% in disk space.  I wanted to know your thoughts on this product and its impact on an SAP system,

thanks

NICK