Dear Expert,
In oracle10g, we find trace files under below directory->
/oracle/<SID>/saptrace/usertrace
but in oracle11g
/oracle/<SID>/saptrace/diag/rdbms/qas/<SID>/trace. Although usertrace folder is present in oracle11g-> /oracle/<SID>/saptrace/usertrace..
In oracle10g, there is no such path exist /oracle/<SID>/saptrace/diag/rdbms/qas/<SID>/trace
Pls let me know what's the difference between both these trace folder in oracle11g
Hi all,
We have Oracle 11g RAC with 3 DB nodes and 4 SAP Application servers. One node crashed due to network issue. The sessions are then relocated to other node due to high availability of oracle. After the node came up. We can see many application sessions which were running on the node. It is not automatically killed. I went through alert log of SAP instances. But still no luck. Kindly suggest on it.
Regards,
Karthik.R
Hello,
I have a question about LOB Segment corresponding to TST03 (field DCONTENT). TST03 is a table from TEMSE.
We are using ECC 6.0 / NW 7.01.
After a billing process job which creates arround 5 spool requests with arround 19.100 pages without graphics nor logos, I noticed that DB size growed arround 16 Gb the first time.
I used DB02 to detect the grow cause and it was due to the LOB Segment corresponding to field TST03-DCONTENT.
Using SP12 (menu TEMSE -> MEMORY ALLOCATION) I noticed that the TEMSE grow was due to these spool requests we generated.
I read SAP note [500340 - FAQ: LOBS|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=745639] and detected that this LOB Segment had RETENTION attribute activated.
We deleted the spool requests with SP01 transaction (or report RSPO1041) and run again the billing process. Then de LOB Segment growed again arround 16 Gb (now with a total size of arround 32 Gb). I understood again the meaning of RETENTION property explained in that SAP note.
Then I decided to activate property PCTVERSION instead of RETENTION. I set PCTVERSION to 1 (1% of allocated space for this LOB Segment is now reserved for storing before images). In this case (32 Gb size) arround 320 Mb is reserved.
We deleted again the last spool requests and run once more time the billing process. I supposed that this LOB, with 32 Gb reserved would not grow now again, as it had 320 Mb reserved for undo management and the rest to 32 Gb with free blocks.
But we detected that this LOB Segment growed again to 43.530 Mb.
We deleted again the spool requests and run again the billing process (always is the same billing process). Now the LOB segment growed 320 Mb, to a total size of 43.850 Mb. This is normal if we suppose that the billing process spool requests need these 43.530 Mb more or less. As the LOB Segment had 435 Mb reserved for undo (1% of 43.530 Mb), it needed to increase its size that quantity more or less.
I have 2 questions:
- Is this LOB Segment behavour correct according to its PCTVERSION=1 property activated (instead of RETENTION)?
- Is it normal that about 19.100 billing pages (without images nor logos) in 5 spool requests used 43.850 Mb in LOB Segment corresponding to table TST03? This is an average of arround 2,2 Mb/page.
I think I do not understand something about LOB Segments.
Any help will be appreciated.
Thanks in advance and best regards.
Hi Folks,
In our Weekly EWA Report of ECC System (EHP6 SP08) , showing recommendation as log file sync observed value is 40 where as
reference value is 15.Could any one please suggest on how to further deep dive .
Regards,
Sharma TVK
Hi Everyone,
I am facing this problem While installing SAP IDES ecc 6 ehp6
I have attached error screen shot.
I have searched for a solution, but it is resolved previously ECC6-EHP6 IDES VERSION INSTALLATION ERROR(Run Abap reports phase)
I have done as per they suggested( i have changed ERROR text in Keydb.xml) and again message box came it asked for start the sap.
After that i installed logon and i have changed ddic password , when i restart the installation again it comes same error which i uploaded.
Can anyone help me..
Dear All,
after getting the result of transactions, Users did not close/export the resulted window for a long time as you see in below image and due to this, work process went in PRIV mode.
here If i kill the session then user complain about it that why kill the session?
what i have to do with resulted window? what will be the impact if I did not close the session?
as I shared the value of parameters if there Is any solution then please share?
Regards,
Hi!
We are running SAP ECC 6.0 system with Oracle on windows.
We have some automatic oracle skripts for backup with tapes.
By executing of these skripts we have from time to time the following error:
CONNECT /'
ORA-00020: maximum number of processes (%s) exceeded
BR0310E Connect to database instance GTE failed
Question
How this error can be solved?
Thank you very much!
Dear All,
Today I all of sudden the oracle database is down.
I have checked alert<SID>.log .. and where as I see the errors in dev_w0 as below.
database is not available betweenn the time invterval 11:29 to 12:32.
How to identify the root cause of the this issue.
Thanks in advance.
--------------------------------------------------------------------------------------------------------------------------------------
Fri Nov 28 11:23:12 2014
N *** ERROR => SsfVerify failed (see note 1055856). [ssoxxsgn.c 144]
N {root-id=0050569D56CF1EE49DD31DAF4BA96577}_{conn-id=0050569D56CF1EE49DD31DBA7828E577}_1
N SsfVerify returned 5 :: SSF_API_SIGNER_ERRORS :: Error during verify - signer error.
N SSF LIB returned 27 :: SSF_API_RECIPIENT_NOT_OK :: Operation not ok for recipient.
N *** ERROR => ValidateTicket failed with rc = 5 and ssf_rc = 27. [ssoxxapi.c 235]
N {root-id=0050569D56CF1EE49DD31DAF4BA96577}_{conn-id=0050569D56CF1EE49DD31DBA7828E577}_1
N *** ERROR => Ticket validation failed with rc = 5 and ssf_rc = 27. [ssoxxkrn.c 993]
N {root-id=0050569D56CF1EE49DD31DAF4BA96577}_{conn-id=0050569D56CF1EE49DD31DBA7828E577}_1
M Fri Nov 28 11:41:44 2014
-------------------------------------------------------------------------------------------------------------------------------------------------------
Regards,
Rama
Dear experts,
we are moving towards integrating RMAN in BRBACKUP for all the systems in our environment.
We have also decided to take Full (level 0) backups twice per week and cumulative backups
each evening.
I would like to ask on 2 details in case I would need to restore such a cumulative backup:
I. How is the restore exactly done ? This is how I currently picture it for myself:
1. The full backup would need to be restored first.
2. Apply the offline redologs that were generated during this full level 0 backup
3. Then restore the last available cumulative backup
4. In the end, apply the offline redollogs generated during this cumulative backup
Or perhaps step 2. is not necessary ?
II. I have come across the following document:
I am a bit confused by the following statement on page 6:
In contrast to the BRRESTORE restore process without RMAN, which requires a closed database, restoring with RMAN requires the database to be mounted
What exactly does that mean ? Do I imagine the restore process wrongly, as I depicted it in I. ??? Kindly advise and let me know
in a clear and understandable form, not in the common fuzzy SAP language :-) Many thanks in advance!
Dear Experts,
we have scheduled SAP_SLD_DATA_COLLECT job via RZ70 in our ECC system.Most of the time it runs successfully but everyday
once it get hanged.
i checked SLD system also and everything is fine there. I have checked RFC SLD_UC and SLD_NUC and both working fine.
what might be the issue kindly suggest.kindly find dev_wx file below
Environment:
SAP ECC6
Windows 2008 R2
Oracle 11.3
Warm Regards,
Sumit Jha
Does SAP recommend to change Oracle TNS Listener Remote Poisoning Port .
Please Suggest !
Hi,
I'm going to perform test restore on productive server. The only thing I want to check is to verify if some files are restoreable. I need to restore one of datafile. Of course I wouldn't like to make restored file working as a part of database. I would like to restore it to another location on the same server.
How can I perform it in BRRESTORE tool.
Thanks in advance,
Bruno
Dear expert,
I extended the PSAPTEMP from 30G to 120G (autoextended switch on by alter temfile) due to rebuild big indexes
Now the operation is finished , and i would like to resize it back to 30G
ALTER TABLESPACE PSAPTEMP ADD TEMPFILE '/oracle/QAT/temp.data2' SIZE 30720M REUSE AUTOEXTEND ON NEXT 10240 MAXSIZE 30720M;
ALTER TABLESPACE PSAPTEMP ADD TEMPFILE '/oracle/QAT/temp.data3' SIZE 30720M REUSE AUTOEXTEND ON NEXT 10240 MAXSIZE 30720M;
ALTER TABLESPACE PSAPTEMP ADD TEMPFILE '/oracle/QAT/temp.data4' SIZE 30720M REUSE AUTOEXTEND ON NEXT 10240 MAXSIZE 30720M;
I need to resize it or i need to drop the 3 added tempfile?
Could you share me the command?
Just one more question: there is for table OLTP compression, it will not ues the tempfile right?
Thank you!
Kate
Hi folks,
Postprocessing phase of the BWD system upgrade stopped with below error.
Call of function module "SUBST_SLANA_STORE" by RFC failed (error-
status "5").
PHASE.LOG shows below info..
"4 ETQ010 Date & Time: 20141202124533
1 ETQ233 Calling function module "SUBST_SLANA_STORE" by RFC
2 ETQ373 parameter "INSTNR" = "0020062310"
2 ETQ373 parameter "SID" = "BWD"
2 ETQ373 parameter "EVALTYPE" = "SUMO"
2 ETQ373 parameter "STARTDATE" = "20141123123410"
2 ETQ373 parameter "ENDDATE" = "20141202123752"
2 ETQ373 parameter "FILENAME"
= "/usr/sap/put/sum11/SUM/abap/htdoc/UPGANA.XML"
1EETQ235 Call of function module "SUBST_SLANA_STORE" by RFC failed
(error-status "5")
2EETQ360 RFC of "SUBST_SLANA_STORE" failed:
2EETQ361 code/exception : 5
2EETQ362 key : ILLEGAL_FILENAME
2EETQ399 Number:000
4 ETQ010 Date & Time: 20141202124533
1EETQ399 Last error code set is: RFC error system BWD nr 00
function 'SUBST_SLANA_STORE' failed with code 5 key ILLEGAL_FILENAME:
Number:000
1EETQ204 Upgrade phase "CREATE_UPGEVAL" aborted with severe errors
("20141202124533")"
The FILENAME which the tool refers is correct. we could able to browse
the file at OS level. Did anyone experienced this issue?
Gowri.
Hi Everyone,
I am facing this problem While installing SAP IDES ecc 6 ehp6
I have attached error screen shot.
I have searched for a solution, but it is resolved previously ECC6-EHP6 IDES VERSION INSTALLATION ERROR(Run Abap reports phase)
I have done as per they suggested( i have changed ERROR text in Keydb.xml) and again message box came it asked for start the sap.
After that i installed logon and i have changed ddic password , when i restart the installation again it comes same error which i uploaded.
Can anyone help me..
Hello,
We are running SAP ECC6, on Oracle 11.2.0.4.0, HP-UX 11.31
Our Production Database (5 TB) consists of some large tables , which size is more than 200 GB ; GLPCA,RESB, ...
We are scheduling the update of the statistics every morning at 06:00 though transaction DB13,
The Oracle Statistics are being processed in parallel :
stats_parallel_degree = 8 , which means that basically up to 8 tables/indexes are being processed at the same time, but
one single thread processes each table. For the sake of simplicity, I call it "external parallelism"
It means that when the statistics of some large tables are obsoletes , and are automatically recalculated, it takes some significant amount of time, more than 15 hours for the DB13 jobs to be processed.
For all those reasons, I am trying to implement the "internal parallelism" , through the dbms_stats package, in order to configure several threads for the largest tables, as explained in details in the following sap note :
424239 - New BRCONNECT parameter: stats_dbms_stats
408532 - Using the DBMS_STATS package for collecting statistics
914174 - Minor functional enhancements in BR*Tools (1)
I spent the two past days , doing some tests on our QAS database (much smaller size), trying to update in parallel the statistics of table GLPCA, through several threads, but it does not work. I am probably missing something, but I can not figure out what
I tried all kinds of combination for the following parameter :
| stats_dbms_stats | ALL:R:1,GLPCA:R:3 |
| stats_dbms_stats | ALL:R:0,GLPCA:R:3 |
| stats_dbms_stats | ALL:R:2,GLPCA:R:3 |
But still, the table GLPCA keeps being processed by one unique thread, and not three threads as expected.
I am joining the DB24 log, maybe someone can help me pinpoint what I am missing :
As you can see, 4 threads are started in parallel because of the parameter
| stats_parallel_degree | 4 |
But one single threads is then assigned to table GLPCA, I was expecting three threads
Thank you for your attention
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Detail log: cepiemwr.sta
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
BR0801I BRCONNECT 7.20 (30)
BR0805I Start of BRCONNECT processing: cepiemwr.sta 2014-12-03 14.55.57
BR0484I BRCONNECT log file: /oracle/RUQ/sapcheck/cepiemwr.sta
BR0101I Parameters
Name Value
oracle_sid RUQ
oracle_home /oracle/RUQ/112_64
oracle_profile /oracle/RUQ/112_64/dbs/initRUQ.ora
sapdata_home /oracle/RUQ
sap_profile /oracle/RUQ/112_64/dbs/initRUQ.sap
system_info ruqadm/oraruq server02 HP-UX B.11.31 U ia64
oracle_info RUQ 11.2.0.4.0 8192 1092 21727164 server02 UTF8 UTF8 1599868393 &RUQ
sap_info 700 SAPSR3 RUQ TEMPLICENSE R3_ORA INITIAL
make_info hpia64 OCI_102 Feb 9 2013
command_line brconnect -c -u / -f stats -t GLPCA
stats_table GLPCA
stats_dbms_stats ALL:R:1,GLPCA:R:3
stats_change_threshold 50
stats_parallel_degree 4
BR0280I BRCONNECT time stamp: 2014-12-03 14.55.58
BR0813I Schema owner found in database RUQ: SAPSR3*
BR0280I BRCONNECT time stamp: 2014-12-03 14.55.58
BR0807I Name of database instance: RUQ
BR0808I BRCONNECT action ID: cepiemwr
BR0809I BRCONNECT function ID: sta
BR0810I BRCONNECT function: stats
BR0812I Database objects for processing: GLPCA
BR0851I Number of tables with missing statistics: 1
Owner SAPSR3: 1
GLPCA
BR0852I Number of tables to delete statistics: 0
BR0854I Number of tables to collect statistics without checking: 0
BR0855I Number of indexes with missing statistics: 5
Owner SAPSR3: 5
GLPCA~0 GLPCA~1 GLPCA~2 GLPCA~3 GLPCA~7
BR0856I Number of indexes to delete statistics: 0
BR0857I Number of indexes to collect statistics: 0
BR0853I Number of tables to check (and collect if needed) statistics: 1
Owner SAPSR3: 1
GLPCA
BR0846I Number of threads that will be started in parallel to the main thread: 4
BR0126I Unattended mode active - no operator confirmation required
BR0280I BRCONNECT time stamp: 2014-12-03 14.55.58
BR0817I Number of monitored/modified tables in schema of owner SAPSR3: 1/0
BR0280I BRCONNECT time stamp: 2014-12-03 14.55.59
BR0877I Checking and collecting table and index statistics...
BR0847I Thread 1 started successfully
BR0847I Thread 2 started successfully
BR0280I BRCONNECT time stamp: 2014-12-03 14.56.00
BR0848I Thread 1 finished with return code 0
BR0280I BRCONNECT thread 2 time stamp: 2014-12-03 14.56.02
BR0881I Collecting statistics for table SAPSR3.GLPCA with method/sample E/P3 ...
BR0280I BRCONNECT thread 2 time stamp: 2014-12-03 14.56.20
BR0884I Statistics collected for table: SAPSR3.GLPCA, rows old/new: -1/1702667
BR0280I BRCONNECT thread 2 time stamp: 2014-12-03 14.56.20
BR0850I 2 of 2 objects processed - 0.003 of 0.003 units done
BR0204I Percentage done: 100.00%, estimated end time: 14:56
BR0001I **************************************************
BR0280I BRCONNECT time stamp: 2014-12-03 14.56.21
BR0848I Thread 2 finished with return code 0
BR0280I BRCONNECT time stamp: 2014-12-03 14.56.21
BR0879I Statistics checked for 1 table
BR0878I Number of tables selected to collect statistics after check: 0
BR0880I Statistics collected for 1/1 tables/indexes
BR0894I Tables with the longest duration of collecting statistics for owner SAPSR3
Pos. Owner Table Duration Rows/old Rows/new Meth./Samp. Space[KB] Used[KB:%] Data[KB:%] Lobs Space[KB] Used[KB:%] Data[KB:%]
[m:s]
1 SAPSR3 GLPCA 0:18 -1 1702667 E/P3 -1 896776:100 746580:83 0 0 0:0 0:0
BR0895I Indexes with the longest duration of collecting statistics for owner SAPSR3
Pos. Owner Index Duration Rows/old Rows/new Meth./Samp. Space[KB] Used[KB:%] Data[KB:%]
[m:s]
1 SAPSR3 GLPCA~0 0:03 -1 1681586 E/P1
BR0900I Usage of space allocated in tablespaces for analyzed tables and indexes
Pos. Tablespace Tables Analy. Space[KB] Used[KB:%] Data[KB:%] Indexes Valid. Space[KB] Used[KB:%] Data[KB:%] Lobs Proc. Space[KB] Used[KB:%] Data[KB:%]
1 PSAPSR3 -1 1 -1 896776:100 746580:83 -1 0 0 0:0 0:0 -1 0 0 0:0 0:0
BR0806I End of BRCONNECT processing: cepiemwr.sta 2014-12-03 14.56.21
BR0280I BRCONNECT time stamp: 2014-12-03 14.56.21
BR0802I BRCONNECT completed successfully
Dear experts,
I am facing an issue related to PSAPTEMP tablespace zero percent use
I have grenerated SGEN before I start SGEN I checked my PSAPSR3740 was arround 16.5GB free all user was locked only i am connected
during sgen precess I observed PSAPTEM 0% user and PSAPUNDO 0.70 % used but PSAPSR3740 grow till it have 602 MB remaining
why its happen how can I reclaim space from PSAPSR3740 and why PSAPTEMP is not use
Regards
Hi Guys,
I have an issue - the issue came under the prerequisite check of Oracle upgrade.
We ran this command ./RUNINSTALLER -check , but it failed. It says 2 lib files are missing and this is not fixable.
Any help on this?
Hi
I have an ides system installed on Oracle 10.2g.
Is it possible to upgrade to 11gR2 without using SAP's packages.
I have installables on Oracle 11gR2.
I have tried it for test purpose, installed the 11g and now while running the DBUA, I get the error that ORA-01507 database not mounted.
Please guide
Hi ,
Please let me know the oracle 11.2 log files and location for troubleshooting in SAP system
I had worked earlier on 9.2 and now I understand that there are a lot of changes with oracle 11.2
I will appreciate your help
Thanks in advance
