Hi, last week due to migration our server was crashed. We built a new SAP server and when trying to restore the CONTROL FILE  from last successful  back up using the commvault tool, we are ending up with a error "SAP BR*TOOL execution failed"

Request help on this immediately.

The error log generated in commvault is as below.

@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

Machine : abtmsasbkp01

File    : JobManager.log

@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

12996 1154 08/25 12:03:23 47259 Servant    [---- IMMEDIATE RESTORE REQUEST ----] Task id [47259] Clnt[abtmssdq01] AppType[SAP for Oracle][61]

12996 cf0  08/25 12:03:24 47259 Scheduler  Phase [2-Restore] (0,0) started on [10.24.42.4] - ClSapAgent.exe SAPRESTORE 47259 47259 -p 2

12996 1e7c 08/25 12:03:24 47259 Servant    Reg [Control] received. Host [10.24.42.4] plattype = 4

12996 1e7c 08/25 12:03:28 47259 Scheduler  Set pending cause [sap BRRESTORE execution failed. Please, check the log file for details.]::Client [abtmssdq01] Application [ClSapAgent] Message Id [301989982] RCID [0] ReservationId [0].  Level [0] flags [0] id [0] overwrite [0] append [0] CustId[0].

12996 1e7c 08/25 12:03:29 47259 Scheduler  Phase [Failed] message received from [10.24.42.4] Module [ClSapAgent] Token [] restartPhase [0]

12996 1e7c 08/25 12:03:29 47259 JobSvr Obj Phase [2-Restore] for Restore Job Failed and cannot be restarted.

12996 1e7c 08/25 12:03:29 47259 Scheduler   -> FAILED <-

12996 25ac 08/25 12:03:29 47259 Scheduler  Got delayed pending cause [318768440] for RCID [0], Reservation Id [0] from client [abtmssdq01] and application [ClSapAgent]::[Oracle Restore [sap BR*TOOL execution failed.

@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

Machine : abtmssdq01

File    : ClSapAgent.log

@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

1156 150 08/25 12:03:24 47259 OraAgentBase::Initialize1() - m_totalBytesDiff=[104857600].

1156 150 08/25 12:03:24 47259 OraAgentBase::Initialize1() - secondsToWait=30 mode=0 m_backup=2.

1156 150 08/25 12:03:24 47259 OraAgentBase::JobObjectInitialize() - [47259] getting the new m_jobObject for CommServer=<abtmsasbkp01>

1156 150 08/25 12:03:24 47259 ::Initialize2() - Initialize2: jobMode=2 SAP Oracle Restores...

1156 150 08/25 12:03:24 47259 ::Initialize2() - Initialize2: ClientHostName=10.24.42.4 ServerHostName=abtmsasbkp01

1156 150 08/25 12:03:24 47259 ClSapAgent::Initialize3() - job id at enter [47259]

1156 150 08/25 12:03:24 47259 ClSapAgent::Initialize3() - m_clientName=abtmssdq01

1156 150 08/25 12:03:24 47259 ClSapAgent::Initialize3() - CVClient::getCommCellId=2

1156 150 08/25 12:03:24 47259 ::JobControlInitialize() - [47259] getting the new m_jobControl for CommServer=<abtmsasbkp01>...

1156 150 08/25 12:03:24 47259 ::JobControlInitialize() - m_jobControl.init(CONTROL) ...

1156 150 08/25 12:03:24 47259 Init() - Initializing job control [token=,cn=abtmssdq01], serverName [abtmsasbkp01], ControlFlag [1], Job Id [47259]

1156 150 08/25 12:03:24 47259 CVJobCtrlLog::registerProcess(): successfuly created file [C:\Program Files\CommVault\Simpana\Base\JobControl\1.156]

1156 150 08/25 12:03:24 47259 JRCACHEDIR: job 47259 creating 'C:\Program Files\CommVault\Simpana\iDataAgent\JobResults\CV_JobResults\2\0\47259'

1156 150 08/25 12:03:24 47259 ::ExecuteBrRestore() - enter

1156 150 08/25 12:03:24 47259 ::ExecuteBrRestore() - After EvRstTask getAppTypeId=61 retCode=0

1156 150 08/25 12:03:24 47259 ::ExecuteBrRestore() - SAP RESTORE instId=13 clientId=9

1156 150 08/25 12:03:24 47259 ClOraAgent::InitializeOraParams() - oraUser[chqadm]

1156 150 08/25 12:03:24 47259 ::ExecuteBrRestore() - oraSID

1156 150 08/25 12:03:24 47259 ::ExecuteBrRestore() - oraUser

1156 150 08/25 12:03:24 47259 ::ExecuteBrRestore() - oraHome

1156 150 08/25 12:03:24 47259 ::ExecuteBrRestore() - getDestinationClientId returned [9] destination client id

1156 150 08/25 12:03:24 47259 ::ExecuteBrRestore() -  [13]  E m_initArgs.instanceId.

1156 150 08/25 12:03:24 47259 ClOraAgent::InitializeOraParams() - oraUser[chqadm]

1156 150 08/25 12:03:24 47259 ::ExecuteBrRestore() -  [13]  F m_initArgs.instanceId.

1156 150 08/25 12:03:24 47259 ::ExecuteBrRestore() - Success in init with JM

1156 150 08/25 12:03:24 47259 CVArchive::Construct() - Constructing CVArchive Object

1156 150 08/25 12:03:24 47259 CVArchive::Construct() - Enable CVArchive Big Buffer [true]

1156 150 08/25 12:03:24 47259 ::ExecuteBrRestore() - Before amgr.getArchFileListByTime(), clientId=9, instanceId=13, appType=61, before=2147483647

1156 150 08/25 12:03:25 47259 ::ExecuteBrRestore() - No of recs=75 snapRestore=0

1156 150 08/25 12:03:25 47259 ::ExecuteBrRestore() - Job=46327 CommCellId=2

1156 150 08/25 12:03:25 ##### JM Client  CVJobClient::initialize(): Invalid job id passed as parameter.

1156 150 08/25 12:03:25 47259 ::ExecuteBrRestore() - Job Init ok

1156 150 08/25 12:03:25 47259 getXmlBlob() call received xml [<?xml version="1.0" encoding="UTF-8" standalone="no" ?><JobManager_BkpJobDetailsXml appType="61" compType="2" jobType="1"><sapOracleJob attribType="0"><dataAttributes backupMode="0" backupType="1" backupdevice="0" clockSkew="-1" detailFileName="G:\oracle\CHQ\sapbackup\beomwekx.aff" endTime="2014-08-13 02.46.03" startTime="2014-08-13 02.05.39" summaryFileName="G:\oracle\CHQ\sapbackup\backCHQ.log"/></sapOracleJob></JobManager_BkpJobDetailsXml>] for job 46327

1156 150 08/25 12:03:25 47259 ::ExecuteBrRestore() - Job=46327 CommCellId=2 [<?xml version="1.0" encoding="UTF-8" standalone="no" ?><JobManager_BkpJobDetailsXml appType="61" compType="2" jobType="1"><sapOracleJob attribType="0"><dataAttributes backupMode="0" backupType="1" backupdevice="0" clockSkew="-1" detailFileName="G:\oracle\CHQ\sapbackup\beomwekx.aff" endTime="2014-08-13 02.46.03" startTime="2014-08-13 02.05.39" summaryFileName="G:\oracle\CHQ\sapbackup\backCHQ.log"/></sapOracleJob></JobManager_BkpJobDetailsXml>]

1156 150 08/25 12:03:25 47259 ::ExecuteBrRestore() - retCode from unserialize=0

1156 150 08/25 12:03:25 47259 ::ExecuteBrRestore() - FULL util_file beomwekx.aff 2014-08-13 02.05.39 2014-08-13 02.46.03

1156 150 08/25 12:03:25 47259 ::ExecuteBrRestore() - logRangeRman=<> logRangeUtil=<> logEndTime=<>

1156 150 08/25 12:03:25 47259 ::ExecuteBrRestore() - checking ....restoreData=0 restoreArchiveLog=0 recoverDb=0 restoreTime=0 recoverTime=0 restoreControlFile=1 openDatabase=0 resetLogs=0 restorePartial=0 revert=0 copyPrec=0 archLogBy=0 resetDatabase=0 logFromTime=0 logToTime=0 logStart=0 logEnd=0 numStreams=1 useRmanFull=0 rmanDetail=

1156 150 08/25 12:03:25 47259 SapJobProgress() - Constructor

1156 150 08/25 12:03:25 47259 ::ExecuteBrRestore() - Neighter Tablespace or ArchiveLogs are being restored...

1156 150 08/25 12:03:25 47259 ::GetNlsLang() - fetching registry key NLS_LANG

1156 150 08/25 12:03:25 47259 ::GetNlsLang() - registry key NLS_LANG not set therefore setting NLS_LANG to American_America.US7ASCII

1156 150 08/25 12:03:25 47259 OraChildProcess::Initialize() - enter

1156 150 08/25 12:03:25 47259 OraChildProcess::ReadBuf() - ReadFile: LastError=109

1156 150 08/25 12:03:25 47259 OraChildProcess::Wait() - Child OK

1156 150 08/25 12:03:25 47259 OraChildProcess::~OraChildProcess() - enter

1156 150 08/25 12:03:25 47259 OraChildProcess::~OraChildProcess() - exit

1156 150 08/25 12:03:25 47259 ::ExecuteBrRestore() - Database is in no mount mode.

1156 150 08/25 12:03:25 47259 ::ExecuteBrRestore() - restore_config: data summary file [G:\oracle\CHQ\sapbackup\backCHQ.log]

1156 150 08/25 12:03:25 47259 ::ExecuteBrRestore() - Invoking: [brrestore -d util_file -b2 \#NULL -m G:\oracle\CHQ\sapbackup\backCHQ.log -c force -u / ]

1156 150 08/25 12:03:25 47259 ::GetNlsLang() - fetching registry key NLS_LANG

1156 150 08/25 12:03:25 47259 ::GetNlsLang() - registry key NLS_LANG not set therefore setting NLS_LANG to American_America.US7ASCII

1156 150 08/25 12:03:25 47259 ClSapAgent::SetSapEnv() - SETENVIRONMENTVARIABLE(DIR_LIBRARY=D:\usr\sap\CHQ\SYS\exe\uc\NTAMD64)

1156 150 08/25 12:03:25 47259 ClSapAgent::FillNTEnv() - SETENVIRONMENTVARIABLE(CvClientName=abtmssdq01) set successfully

1156 150 08/25 12:03:25 47259 ClSapAgent::FillNTEnv() - SETENVIRONMENTVARIABLE(CvInstanceName=Instance001) set successfully

1156 150 08/25 12:03:25 47259 OraChildProcess::Initialize() - enter

1156 150 08/25 12:03:25 47259 OraChildProcess::BeginWait() - Rman thread with HNDL=314 TID=2840 EC=259 was created

1156 b18 08/25 12:03:25 47259 OraChildProcess::WaitThread() - start: thread Id=2840

1156 b18 08/25 12:03:25 47259 OraChildProcess::Wait() - Child process: dwExitCode=3

1156 b18 08/25 12:03:25 47259 OraChildProcess::WaitThread() - Wait failed; lastErr=3

1156 150 08/25 12:03:28 47259 ::ExecuteBrRestore() - After Begin wait...

1156 150 08/25 12:03:28 47259 ::ExecuteBrRestore() - wait failed...

1156 150 08/25 12:03:28 47259 OraChildProcess::ReadBuf() - Rman thread with HNDL=304 TID=2912 EC=259 was created

1156 b60 08/25 12:03:28 47259 OraChildProcess::ReadThread() - start: thread Id=2912

1156 b60 08/25 12:03:29 47259 OraChildProcess::ReadThread() - GETLASTERROR returned=109 (ret=0)

1156 150 08/25 12:03:29 47259 ::CloseJobResultsFile() - [47259] going to m_buResults.closeFile...

1156 150 08/25 12:03:29 47259 STORERESULTS: cleanUp: skipping jobResults cleanup. Another cleanup process is running

1156 150 08/25 12:03:29 47259 JOBRESULTSTABLE(C:\Program Files\CommVault\Simpana\iDataAgent\JobResults\CV_JobResults\2\0\47259\JobResults): removing copy 'C:\Program Files\CommVault\Simpana\iDataAgent\JobResults\CV_JobResults\2\0\47259'

1156 150 08/25 12:03:29 47259 ::CloseJobResultsFile() - [47259] m_buResults.closeFile() & cleanUp() succeeded.

1156 150 08/25 12:03:29 47259 OraChildProcess::Finalize() - start

1156 150 08/25 12:03:29 47259 OraChildProcess::~OraChildProcess() - enter

1156 150 08/25 12:03:29 47259 OraChildProcess::~OraChildProcess() - exit

1156 150 08/25 12:03:29 47259 ::ProcessComplete() - Sending ORA_MSG_RMAN_COMPLETE

1156 150 08/25 12:03:29 47259 Sending FAILED complete message to JM, 47259

1156 150 08/25 12:03:29 47259 ::ExecuteBrRestore() - sap BR*TOOL execution failed.

1156 150 08/25 12:03:29 47259 ::ExecuteBrRestore() - sap BR*TOOL execution failed.

1156 150 08/25 12:03:29 47259 ::ExecuteBrRestore() - m_jobObject->setPendingCause(sap BR*TOOL execution failed.

1156 150 08/25 12:03:29 47259 GetChannelParamFileName() - Channel Parameter File : C:\Program Files\CommVault\Simpana\Base\Temp\cv_channel_info47259

1156 150 08/25 12:03:29 47259 DeleteChannelParamFile() - Cleaned up channel parameter file

1156 150 08/25 12:03:29 47259 ::Close() - ClOraAgent Closed.

1156 150 08/25 12:03:29 47259 ::Finalize() - enter Parent=true

1156 150 08/25 12:03:29 47259 ::Finalize() - m_jobControl->finishedWorkWithoutExit() ...

1156 180 08/25 12:03:29 47259 CVJobCtrlLog::unregisterProcess(): successfuly removed file [C:\Program Files\CommVault\Simpana\Base\JobControl\1.156]

1156 150 08/25 12:03:29 47259 ::Finalize() - delete m_jobControl ...

1156 150 08/25 12:03:29 47259 ::CloseJobResultsFile() - [47259] going to m_buResults.closeFile...

1156 150 08/25 12:03:29 47259 STORERESULTS: cleanUp: skipping jobResults cleanup. Another cleanup process is running

1156 150 08/25 12:03:29 47259 JOBRESULTSTABLE(C:\Program Files\CommVault\Simpana\iDataAgent\JobResults\CV_JobResults\2\0\47259\JobResults): removing copy 'C:\Program Files\CommVault\Simpana\iDataAgent\JobResults\CV_JobResults\2\0\47259'

1156 150 08/25 12:03:29 47259 ::CloseJobResultsFile() - [47259] m_buResults.closeFile() & cleanUp() succeeded.

We have System A with newly upgraded to EHP7

SAP kernel 741_REL

DB  Oracle 11.2.0.4

OS Linux RHEL 6.0

We have another System B with EHP6

SAP kernel 721_REL

DB  Oracle 11.2.0.2

OS Linux RHEL 5.3

Now We  want system B as a copy of A .We will upgrade OS and DB at a same level as System A has. So can we gonfor homogeneous system copy?

I am not understanding how we can get EHP7 on system B.

Or will SWPM(software provisioning manager) can do system copy with SAP component copy?

Please suggest

Dear Friends,

After upgrade the kernel version from 701 to 721, we are getting short dump error in transaction CJ20N when going for save the data. The program name is SAPLCNPB_M.

We have get the abap dump error message - ITAB_STRUC_ACCESS_VIOLATION.

Before kernel upgrade we did not get any above message.

Please suggest for solution

Regards,

Ajay Asawa

Hello,

we upgrade an Oracle DB from 11.x to 11.2.0.4

When werum the DBUA , we get the following error

ORA-01435 User does not exist.  (Ignore or cancel)

What is to do?

Gruß

Toni

Hi,

We have successfully installed the NW7.31 with ORACLE 11.2.0.4 on AIX.

Its a fresh installed system, after installation we have applied the saplicense through SLICENSE and after that upgrade the kernel(We have run the ./saproot.sh <SAPSID> with root user).

Kernels are upgraded successfully, we have checked the disp+work, kernel patch level is upgraded successfully.

SAP is started normally, but now we are facing two issues on OS level.

1. Issue is regarding to the saplicense command....

abcadm 4> saplicense -show

saplicense: no license entries found

abcadm 5> saplicense -number

saplicense: read installation number failed

*** Can not read profile parameter SAPSYSTEMNAME

Start saplicense with -number NAME=<sid>

abcadm 6> saplicense -number NAME=ABC

Read installation number for SAP SYSTEM: ABC

INSTALLATION NO = INITIAL

2. When we are trying to run the Update statistics on database with DB13 command following error occurs. Even i have tried via brtools but still following error occures.

BR0301E SQL error -1031 at location BrLicCheck-12, SQL statement:

'SELECT MAX(SYSTEMNAME), MAX(SYSID) FROM SAP_MLICHECK WHERE EXPIRATION_DATE = (SELECT MAX(EXPIRATION_DATE) FROM SAP_MLICHECK)'

ORA-01031: insufficient privileges

I have checked the R3trans -d it working fine.

oraabc 15> R3trans -d

This is R3trans version 6.24 (release 721 - 08.05.14 - 16:50:00).

unicode enabled version

R3trans finished (0000).

In SLICENSE tcode it showing the license entries but when we are run the command from os level "saplicense", it didnt found any license entry.

Kindly suggest.

regards,

amit

Hi,

PFA,

In CRP server, VerifyDB job is getting failed with error code 0005.

Reason:

BR0278E Command output of '/oracle/CRP/102_64/bin/dbv file=/oracle/CRP/sapdata1/crp_70/crp.data70 blocksize=8192':

12714110 : map : Permission Denied

DBVERIFY: Release 10.2.0.4.0 - Production on Sun Apr 20 03:00:46 2014

Copyright (c) 1982, 2007, Oracle.  All rights reserved.

DBV-00100: Specified FILE (/oracle/CRP/sapdata1/crp_70/crp.data70) not accessible

BR0280I BRBACKUP time stamp: 2014-04-20 03.00.46

BR0363E Verification of backup of /oracle/CRP/sapdataX/crp_XX/crp.dataXX failed due to previous errors.

Kindly help me to sort this typical issue.

Regards,

Sanjeev Kumar.

Hi Sapians,

I have a  requirement to kernel upgrade from 721 release 132 PL to 300 PL . I am not able to get any side effects or any note for the same.

As i Move in the same release i dont think there will be a problem in it. Kindly suggest on it.

Regards,

Karthik.R

Hello SAP,

When we configure the STMS System (PRO is the domain), the connection with DES system fail (the CALTP_Linux RFC no run properly)

See the image please,

When execute ping to host the ping respond properly,

64 bytes from
HOST): icmp_seq=1 ttl=64 time=0.015 ms

  64 bytes from
(IP): icmp_seq=2 ttl=64 time=0.023 ms

64 bytes from
HOST): icmp_seq=3 ttl=64 time=0.021 ms

64 bytes from
HOST: icmp_seq=4 ttl=64 time=0.019 ms

64 bytes from
HOSTicmp_seq=5 ttl=64 time=0.025 ms

64 bytes from
HOSTicmp_seq=6 ttl=64 time=0.026 ms

64 bytes from
HOSTicmp_seq=7 ttl=64 time=0.023 ms

Can you help me please?

Thanks.

Our functional team is facing issue while saving data in va03 transaction. IT prompts Sales order saved successfully and when we go to va02 and try to open getting error Document "SD document not in database or has been archived"

So when I checked sm66 update WP is on hold due to RFC response. and in st03 it has high response time

Task          steps  response time                                             wait time

UPDATE2    2       1.130,0               335,0    65,0    724,0    0,0    0,0                0,0    0,0    70,5

UPDATE    29        1.188.035,2       19,6    8,6    35,9    0,0         1.187.979,4    0,0    0,0    0,3

Also in SM13 all updates are at Initial status. Nothing get updated in database.

Please help as functional team is no more able to work and as basis person We need to resolve the same.

Hi,

When attempting to run a Check DB via DB13 I get the following error:

BR0801I BRCONNECT 7.20 (22)

BR0805I Start of BRCONNECT processing: ceoppnld.chk 2014-08-27 09.55.25

BR0484I BRCONNECT log file: N:\oracle\bwq\sapcheck\ceoppnld.chk

BR0280I BRCONNECT time stamp: 2014-08-27 09.55.26

BR0301E SQL error -1031 at location BrInitOraCreate-2, SQL statement:

'CONNECT / AT PROF_CONN IN SYSOPER MODE'

ORA-01031: insufficient privileges

BR0303E Determination of Oracle version failed

BR0806I End of BRCONNECT processing: ceoppnld.chk 2014-08-27 09.55.26

BR0280I BRCONNECT time stamp: 2014-08-27 09.55.26

BR0804I BRCONNECT terminated with errors

I have followed Note 134592:  Importing the SAPDBA role (sapdba_role.sql) but problem still exists.

There are plenty of other examples of ORA-01031 errors online but as yet I haven't found a solution.

I'm far from an expert on this subject so was hoping for a little bit of assistance from someone.

Thanks

Oracle:  11.2.0.1.0

Does anybody know of a way to restrict the size of a core dump on AIX so that it does not fill /usr/sap/SID/../work?

Hi All,

Job SAP_COLLECTOR_FOR_PERFMONITOR is scheduled hourly on ECC system.

All jobs are finished successfully in a day but only at specific time its getting failed.

Recently we have upgrade the support package of SAP_BASIS & SAP_ABP from 05 to 13. After then we are getting this error message.

In ST22 we getting ABAP dump for job:-

Runtime Errors         LOAD_PROGRAM_NOT_FOUND

Date and Time          27.08.2014 12:19:42

Short text

     Program "RSORA811" not found.

What happened?

     There are several possibilities:

     Error in the ABAP Application Program

     The current ABAP program "RSCOLL00" had to be terminated because it has

     come across a statement that unfortunately cannot be executed.

     or

     Error in the SAP kernel.

     The current ABAP "RSCOLL00" program had to be terminated because the

     ABAP processor detected an internal system error.

Error analysis

    On account of a branch in the program

    (CALL FUNCTION/DIALOG, external PERFORM, SUBMIT)

    or a transaction call, another ABAP/4 program

    is to be loaded, namely "RSORA811".

    However, program "RSORA811" does not exist in the library.

    Possible reasons:

    a) Wrong program name specified in an external PERFORM or

       SUBMIT or, when defining a new transaction, a new

       dialog module or a new function module.

    b) Transport error

How to correct the error

    Check the last transports to the R/3 System.

    Are changes currently being made to the program "RSCOLL00"?

    Has the correct program been entered in table TSTC for Transaction " "?

    -

    If the error occures in a non-modified SAP program, you may be able to

    find an interim solution in an SAP Note.

    If you have access to SAP Notes, carry out a search with the following

    keywords:

    "LOAD_PROGRAM_NOT_FOUND" " "

    "RSCOLL00" or "RSCOLL00"

    "LOOP_AT_SYSTEMS_AND_REPORTS"

.....

System Details :-

SAP Version - SAP ECC 6.0 EHP 4

Oracle DB - 10.2.0.5.0

OS- HP UNIX 11.31

Kernel Release 721 - patch level 201

Please suggest for solution

Regards,

Ajay Asawa

Hello All,

I am upgrading our ECC system from EHP4 to EHP7, during the initial phase , SUM is throwing below error

Mapping of Table Classes to Container

INFO: The program has detected an inconsistency in your system:

Container pair 'PSAPSR3'/'PSAPSR3701X' for tabart 'CLUST' not identical.

Container pair 'PSAPSR3'/'PSAPSR3701X' for tabart 'DDIM' not identical.

Container pair 'PSAPSR3'/'PSAPSR3701X' for tabart 'DFACT' not identical.

Container pair 'PSAPSR3'/'PSAPSR3701X' for tabart 'DODS' not identical.

The inconsistency could cause problems when new tables are created. It may additionally lead to incorrect free space requirements.

We highly recommend that you fix the entries listed above and repeat the check. For more information, see SAP Note 541542

Below are the TAORA and IAORA for PSAPSR3 and PSAPSR3701X

TAORA

TABART  TABSPACE                         PCTINC OFREELIST OFREEGROUP OPCTFREE OPCTUSED

SLDEF   PSAPSR3701X                      0000   001       01         10       40

SLEXC   PSAPSR3701X                      0000   001       01         10       40

SSDEF   PSAPSR3701X                      0000   001       01         10       40

SSEXC   PSAPSR3701X                      0000   001       01         10       40

IAORA

TABART  TABSPACE                       PCTINC OFREELIST OPCTFREE

CLUST   PSAPSR3701X                    0000   001       10

DDIM    PSAPSR3701X                    0000   001       10

DFACT   PSAPSR3701X                    0004   001       10

DODS    PSAPSR3701X                    0004   001       10

SLDEF   PSAPSR3701X                    0000   001       10

SLEXC   PSAPSR3701X                    0000   001       10

SSDEF   PSAPSR3701X                    0000   001       10

SSEXC   PSAPSR3701X                    0000   001       10

PSAPSR3 - TAORA

TABART  TABSPACE                         PCTINC OFREELIST OFREEGROUP OPCTFREE OPCTUSED

APPL0   PSAPSR3                          0000   001       01         10       40

APPL1   PSAPSR3                          0000   001       01         10       40

APPL2   PSAPSR3                          0000   001       01         10       40

CLUST   PSAPSR3                          0000   001       01         10       40

DDIM    PSAPSR3                          0000   001       01         00       60

DFACT   PSAPSR3                          0000   004       01         10       60

DODS    PSAPSR3                          0000   004       01         00       60

POOL    PSAPSR3                          0000   001       01         10       40

SDIC    PSAPSR3                          0000   001       01         10       40

SDOCU   PSAPSR3                          0000   001       01         10       40

SLOAD   PSAPSR3                          0000   001       01         10       40

SPROT   PSAPSR3                          0000   001       01         10       40

SSRC    PSAPSR3                          0000   001       01         10       40

TEMP    PSAPSR3                          0000   001       01         10       40

IAORA

TABART  TABSPACE                       PCTINC OFREELIST OPCTFREE

APPL0   PSAPSR3                        0000   001       10

APPL1   PSAPSR3                        0000   001       10

APPL2   PSAPSR3                        0000   001       10

POOL    PSAPSR3                        0000   001       10

SDIC    PSAPSR3                        0000   001       10

SDOCU   PSAPSR3                        0000   001       10

SLOAD   PSAPSR3                        0000   001       10

SPROT   PSAPSR3                        0000   001       10

SSRC    PSAPSR3                        0000   001       10

TEMP    PSAPSR3                        0000   001       10

i have tried creating entries manually from SE16 for missing ones in TAORA and IAORA, but system says "a data record for specified key already exists" and i can see that entry from sqlplus but not from SE16.

I have followed all related forum threads , but not luck, i am not able to fix this issue.

Please help

Thanks,

Aravind

Hi, last week due to migration our server was crashed. We built a new SAP server and when trying to restore the CONTROL FILE  from last successful  back up using the commvault tool, we are ending up with a error "SAP BR*TOOL execution failed"

Request help on this immediately.

The error log generated in commvault is as below.

@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

Machine : abtmsasbkp01

File    : JobManager.log

@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

12996 1154 08/25 12:03:23 47259 Servant    [---- IMMEDIATE RESTORE REQUEST ----] Task id [47259] Clnt[abtmssdq01] AppType[SAP for Oracle][61]

12996 cf0  08/25 12:03:24 47259 Scheduler  Phase [2-Restore] (0,0) started on [10.24.42.4] - ClSapAgent.exe SAPRESTORE 47259 47259 -p 2

12996 1e7c 08/25 12:03:24 47259 Servant    Reg [Control] received. Host [10.24.42.4] plattype = 4

12996 1e7c 08/25 12:03:28 47259 Scheduler  Set pending cause [sap BRRESTORE execution failed. Please, check the log file for details.]::Client [abtmssdq01] Application [ClSapAgent] Message Id [301989982] RCID [0] ReservationId [0].  Level [0] flags [0] id [0] overwrite [0] append [0] CustId[0].

12996 1e7c 08/25 12:03:29 47259 Scheduler  Phase [Failed] message received from [10.24.42.4] Module [ClSapAgent] Token [] restartPhase [0]

12996 1e7c 08/25 12:03:29 47259 JobSvr Obj Phase [2-Restore] for Restore Job Failed and cannot be restarted.

12996 1e7c 08/25 12:03:29 47259 Scheduler   -> FAILED <-

12996 25ac 08/25 12:03:29 47259 Scheduler  Got delayed pending cause [318768440] for RCID [0], Reservation Id [0] from client [abtmssdq01] and application [ClSapAgent]::[Oracle Restore [sap BR*TOOL execution failed.

@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

Machine : abtmssdq01

File    : ClSapAgent.log

@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

1156 150 08/25 12:03:24 47259 OraAgentBase::Initialize1() - m_totalBytesDiff=[104857600].

1156 150 08/25 12:03:24 47259 OraAgentBase::Initialize1() - secondsToWait=30 mode=0 m_backup=2.

1156 150 08/25 12:03:24 47259 OraAgentBase::JobObjectInitialize() - [47259] getting the new m_jobObject for CommServer=<abtmsasbkp01>

1156 150 08/25 12:03:24 47259 ::Initialize2() - Initialize2: jobMode=2 SAP Oracle Restores...

1156 150 08/25 12:03:24 47259 ::Initialize2() - Initialize2: ClientHostName=10.24.42.4 ServerHostName=abtmsasbkp01

1156 150 08/25 12:03:24 47259 ClSapAgent::Initialize3() - job id at enter [47259]

1156 150 08/25 12:03:24 47259 ClSapAgent::Initialize3() - m_clientName=abtmssdq01

1156 150 08/25 12:03:24 47259 ClSapAgent::Initialize3() - CVClient::getCommCellId=2

1156 150 08/25 12:03:24 47259 ::JobControlInitialize() - [47259] getting the new m_jobControl for CommServer=<abtmsasbkp01>...

1156 150 08/25 12:03:24 47259 ::JobControlInitialize() - m_jobControl.init(CONTROL) ...

1156 150 08/25 12:03:24 47259 Init() - Initializing job control [token=,cn=abtmssdq01], serverName [abtmsasbkp01], ControlFlag [1], Job Id [47259]

1156 150 08/25 12:03:24 47259 CVJobCtrlLog::registerProcess(): successfuly created file [C:\Program Files\CommVault\Simpana\Base\JobControl\1.156]

1156 150 08/25 12:03:24 47259 JRCACHEDIR: job 47259 creating 'C:\Program Files\CommVault\Simpana\iDataAgent\JobResults\CV_JobResults\2\0\47259'

1156 150 08/25 12:03:24 47259 ::ExecuteBrRestore() - enter

1156 150 08/25 12:03:24 47259 ::ExecuteBrRestore() - After EvRstTask getAppTypeId=61 retCode=0

1156 150 08/25 12:03:24 47259 ::ExecuteBrRestore() - SAP RESTORE instId=13 clientId=9

1156 150 08/25 12:03:24 47259 ClOraAgent::InitializeOraParams() - oraUser[chqadm]

1156 150 08/25 12:03:24 47259 ::ExecuteBrRestore() - oraSID

1156 150 08/25 12:03:24 47259 ::ExecuteBrRestore() - oraUser

1156 150 08/25 12:03:24 47259 ::ExecuteBrRestore() - oraHome

1156 150 08/25 12:03:24 47259 ::ExecuteBrRestore() - getDestinationClientId returned [9] destination client id

1156 150 08/25 12:03:24 47259 ::ExecuteBrRestore() -  [13]  E m_initArgs.instanceId.

1156 150 08/25 12:03:24 47259 ClOraAgent::InitializeOraParams() - oraUser[chqadm]

1156 150 08/25 12:03:24 47259 ::ExecuteBrRestore() -  [13]  F m_initArgs.instanceId.

1156 150 08/25 12:03:24 47259 ::ExecuteBrRestore() - Success in init with JM

1156 150 08/25 12:03:24 47259 CVArchive::Construct() - Constructing CVArchive Object

1156 150 08/25 12:03:24 47259 CVArchive::Construct() - Enable CVArchive Big Buffer [true]

1156 150 08/25 12:03:24 47259 ::ExecuteBrRestore() - Before amgr.getArchFileListByTime(), clientId=9, instanceId=13, appType=61, before=2147483647

1156 150 08/25 12:03:25 47259 ::ExecuteBrRestore() - No of recs=75 snapRestore=0

1156 150 08/25 12:03:25 47259 ::ExecuteBrRestore() - Job=46327 CommCellId=2

1156 150 08/25 12:03:25 ##### JM Client  CVJobClient::initialize(): Invalid job id passed as parameter.

1156 150 08/25 12:03:25 47259 ::ExecuteBrRestore() - Job Init ok

1156 150 08/25 12:03:25 47259 getXmlBlob() call received xml [<?xml version="1.0" encoding="UTF-8" standalone="no" ?><JobManager_BkpJobDetailsXml appType="61" compType="2" jobType="1"><sapOracleJob attribType="0"><dataAttributes backupMode="0" backupType="1" backupdevice="0" clockSkew="-1" detailFileName="G:\oracle\CHQ\sapbackup\beomwekx.aff" endTime="2014-08-13 02.46.03" startTime="2014-08-13 02.05.39" summaryFileName="G:\oracle\CHQ\sapbackup\backCHQ.log"/></sapOracleJob></JobManager_BkpJobDetailsXml>] for job 46327

1156 150 08/25 12:03:25 47259 ::ExecuteBrRestore() - Job=46327 CommCellId=2 [<?xml version="1.0" encoding="UTF-8" standalone="no" ?><JobManager_BkpJobDetailsXml appType="61" compType="2" jobType="1"><sapOracleJob attribType="0"><dataAttributes backupMode="0" backupType="1" backupdevice="0" clockSkew="-1" detailFileName="G:\oracle\CHQ\sapbackup\beomwekx.aff" endTime="2014-08-13 02.46.03" startTime="2014-08-13 02.05.39" summaryFileName="G:\oracle\CHQ\sapbackup\backCHQ.log"/></sapOracleJob></JobManager_BkpJobDetailsXml>]

1156 150 08/25 12:03:25 47259 ::ExecuteBrRestore() - retCode from unserialize=0

1156 150 08/25 12:03:25 47259 ::ExecuteBrRestore() - FULL util_file beomwekx.aff 2014-08-13 02.05.39 2014-08-13 02.46.03

1156 150 08/25 12:03:25 47259 ::ExecuteBrRestore() - logRangeRman=<> logRangeUtil=<> logEndTime=<>

1156 150 08/25 12:03:25 47259 ::ExecuteBrRestore() - checking ....restoreData=0 restoreArchiveLog=0 recoverDb=0 restoreTime=0 recoverTime=0 restoreControlFile=1 openDatabase=0 resetLogs=0 restorePartial=0 revert=0 copyPrec=0 archLogBy=0 resetDatabase=0 logFromTime=0 logToTime=0 logStart=0 logEnd=0 numStreams=1 useRmanFull=0 rmanDetail=

1156 150 08/25 12:03:25 47259 SapJobProgress() - Constructor

1156 150 08/25 12:03:25 47259 ::ExecuteBrRestore() - Neighter Tablespace or ArchiveLogs are being restored...

1156 150 08/25 12:03:25 47259 ::GetNlsLang() - fetching registry key NLS_LANG

1156 150 08/25 12:03:25 47259 ::GetNlsLang() - registry key NLS_LANG not set therefore setting NLS_LANG to American_America.US7ASCII

1156 150 08/25 12:03:25 47259 OraChildProcess::Initialize() - enter

1156 150 08/25 12:03:25 47259 OraChildProcess::ReadBuf() - ReadFile: LastError=109

1156 150 08/25 12:03:25 47259 OraChildProcess::Wait() - Child OK

1156 150 08/25 12:03:25 47259 OraChildProcess::~OraChildProcess() - enter

1156 150 08/25 12:03:25 47259 OraChildProcess::~OraChildProcess() - exit

1156 150 08/25 12:03:25 47259 ::ExecuteBrRestore() - Database is in no mount mode.

1156 150 08/25 12:03:25 47259 ::ExecuteBrRestore() - restore_config: data summary file [G:\oracle\CHQ\sapbackup\backCHQ.log]

1156 150 08/25 12:03:25 47259 ::ExecuteBrRestore() - Invoking: [brrestore -d util_file -b2 \#NULL -m G:\oracle\CHQ\sapbackup\backCHQ.log -c force -u / ]

1156 150 08/25 12:03:25 47259 ::GetNlsLang() - fetching registry key NLS_LANG

1156 150 08/25 12:03:25 47259 ::GetNlsLang() - registry key NLS_LANG not set therefore setting NLS_LANG to American_America.US7ASCII

1156 150 08/25 12:03:25 47259 ClSapAgent::SetSapEnv() - SETENVIRONMENTVARIABLE(DIR_LIBRARY=D:\usr\sap\CHQ\SYS\exe\uc\NTAMD64)

1156 150 08/25 12:03:25 47259 ClSapAgent::FillNTEnv() - SETENVIRONMENTVARIABLE(CvClientName=abtmssdq01) set successfully

1156 150 08/25 12:03:25 47259 ClSapAgent::FillNTEnv() - SETENVIRONMENTVARIABLE(CvInstanceName=Instance001) set successfully

1156 150 08/25 12:03:25 47259 OraChildProcess::Initialize() - enter

1156 150 08/25 12:03:25 47259 OraChildProcess::BeginWait() - Rman thread with HNDL=314 TID=2840 EC=259 was created

1156 b18 08/25 12:03:25 47259 OraChildProcess::WaitThread() - start: thread Id=2840

1156 b18 08/25 12:03:25 47259 OraChildProcess::Wait() - Child process: dwExitCode=3

1156 b18 08/25 12:03:25 47259 OraChildProcess::WaitThread() - Wait failed; lastErr=3

1156 150 08/25 12:03:28 47259 ::ExecuteBrRestore() - After Begin wait...

1156 150 08/25 12:03:28 47259 ::ExecuteBrRestore() - wait failed...

1156 150 08/25 12:03:28 47259 OraChildProcess::ReadBuf() - Rman thread with HNDL=304 TID=2912 EC=259 was created

1156 b60 08/25 12:03:28 47259 OraChildProcess::ReadThread() - start: thread Id=2912

1156 b60 08/25 12:03:29 47259 OraChildProcess::ReadThread() - GETLASTERROR returned=109 (ret=0)

1156 150 08/25 12:03:29 47259 ::CloseJobResultsFile() - [47259] going to m_buResults.closeFile...

1156 150 08/25 12:03:29 47259 STORERESULTS: cleanUp: skipping jobResults cleanup. Another cleanup process is running

1156 150 08/25 12:03:29 47259 JOBRESULTSTABLE(C:\Program Files\CommVault\Simpana\iDataAgent\JobResults\CV_JobResults\2\0\47259\JobResults): removing copy 'C:\Program Files\CommVault\Simpana\iDataAgent\JobResults\CV_JobResults\2\0\47259'

1156 150 08/25 12:03:29 47259 ::CloseJobResultsFile() - [47259] m_buResults.closeFile() & cleanUp() succeeded.

1156 150 08/25 12:03:29 47259 OraChildProcess::Finalize() - start

1156 150 08/25 12:03:29 47259 OraChildProcess::~OraChildProcess() - enter

1156 150 08/25 12:03:29 47259 OraChildProcess::~OraChildProcess() - exit

1156 150 08/25 12:03:29 47259 ::ProcessComplete() - Sending ORA_MSG_RMAN_COMPLETE

1156 150 08/25 12:03:29 47259 Sending FAILED complete message to JM, 47259

1156 150 08/25 12:03:29 47259 ::ExecuteBrRestore() - sap BR*TOOL execution failed.

1156 150 08/25 12:03:29 47259 ::ExecuteBrRestore() - sap BR*TOOL execution failed.

1156 150 08/25 12:03:29 47259 ::ExecuteBrRestore() - m_jobObject->setPendingCause(sap BR*TOOL execution failed.

1156 150 08/25 12:03:29 47259 GetChannelParamFileName() - Channel Parameter File : C:\Program Files\CommVault\Simpana\Base\Temp\cv_channel_info47259

1156 150 08/25 12:03:29 47259 DeleteChannelParamFile() - Cleaned up channel parameter file

1156 150 08/25 12:03:29 47259 ::Close() - ClOraAgent Closed.

1156 150 08/25 12:03:29 47259 ::Finalize() - enter Parent=true

1156 150 08/25 12:03:29 47259 ::Finalize() - m_jobControl->finishedWorkWithoutExit() ...

1156 180 08/25 12:03:29 47259 CVJobCtrlLog::unregisterProcess(): successfuly removed file [C:\Program Files\CommVault\Simpana\Base\JobControl\1.156]

1156 150 08/25 12:03:29 47259 ::Finalize() - delete m_jobControl ...

1156 150 08/25 12:03:29 47259 ::CloseJobResultsFile() - [47259] going to m_buResults.closeFile...

1156 150 08/25 12:03:29 47259 STORERESULTS: cleanUp: skipping jobResults cleanup. Another cleanup process is running

1156 150 08/25 12:03:29 47259 JOBRESULTSTABLE(C:\Program Files\CommVault\Simpana\iDataAgent\JobResults\CV_JobResults\2\0\47259\JobResults): removing copy 'C:\Program Files\CommVault\Simpana\iDataAgent\JobResults\CV_JobResults\2\0\47259'

1156 150 08/25 12:03:29 47259 ::CloseJobResultsFile() - [47259] m_buResults.closeFile() & cleanUp() succeeded.

Hi Team,

We are using ECC6 /Oracle,few days back 2000 entries got deleted from one table.

How can we get the log for deleted entries with all the details like User ID ,Date and time of Deletion.

I have already checked STAD and DBACOCKPIT for SQL queries of deletion of records but could not find any log .

Kindly help me to resolve this issue.

Hello,

auditor complained settings of audit parameters in oracle 11, especially audit_sys_operations=FALSE and audit_syslog_level=' '.

I found notes 1551504, 700548, 1963700, 1128663 etc with informations about technical configuration.

But I didn't found notes or links about the recommended setting by SAP and by advisors. Sometimes these recomendations differ, so that advisors recommend stronger security settings.

What are recommended settings for these audit parameters? Is it better to log auditfiles in database? Do logs have to be reported to the UNIX-syslog? And what is a good way to secure auditfiles in a folder, so that dbauser can still access for reading or creating?

Regards,

Julia

Hi,

I`d like to ask you about one case. I try to install new SAP ERP ECC 6.06 system, based on SUSE Linux Enterprise Server 11 and Oracle 11.2.0.3.

From OSS I download Software Provisioning Mgr 1.0 and SAP software:

SAP ERP -> SAP ERP ENHANCANE PACKAGE -> EHP6 FOR SAP ERP 6.0 -> SAP EHP3 FOR SAP NETWEAVER 7.0

Later on fresh version SUSE I run SWPM -> SAP Netweaver 7.0 EHP 3 -> ABAP -> Oracle -> Central system. During the SAP installation, I saw information about ORACLE installation:

Log in as user ora<sid>

Set the DISPLAY variable

Change the directory...

Start ./RUNINSTALLER

Then I logon to the system as ora<sid>, and I created directory and changed premission to thes directories:

mkdir /oracle/<SID>/11203/dbs

mkdir /oracle/<SID>/11203/network

mkdir /oracle/<SID>/11203/network/admin

mkdir /oracle/<SID>/11203/bin

mkdir /oracle/<SID>/11203/bin/oracle

chmod 777

Next I download last /RUNINSTALLER version (NOTE 1524205) and I started installation Oracle. All looks weel, I instaled Oracle, after instalation I run script:

oraInstRoot.sh

root.sh

ORACLE_HOME=/oracle/<SID>/11203

pathname local bin directory = /usr/local/bin/

and created links - ln -s 11203 /oracle/<SID>/112_64

But if I try continue SAP installation, I see information:

THE ORACLE DATABASE SOFTWARE IN NOT YET INSTALLED.

Of coure I restarted SWPM, and still I have problem. What should I do, where is the problem ?

Regards,

T.

Dear Experts,

To use latest database connection method from OPS$ to SSFS i configured the system as per SAP Note   1639578 - SSFS as password storage for primary database connect

Current environment of system is with Oracle 11.2.0.3 with kernel 720_EXT .

After complete configuration and setting up of parameters rsdb_ssfs_connect 1,at <sid>adm  R3trans -d results 0000 as a successful connevction output .

But on execution of command startsap r3 dispatcher fails after some time,for analysis checked dev_w0 work process and found still showing Logon as OPS$-user to get SAPSR3's password.

For ref attached dev_w0 and trans.log files

Already followed link REMOTE_OS_AUTHENT

and SAP Note ORA-01017 .

Kindly help me to resolve the issue.

Regards,

Gaurav

Dear Experts,

when i am trying to take the online backup,I am getting below error ,please advice me.

BR0051I BRBACKUP 6.40 (52)

BR0055I Start of database backup: beoqasbx.ant 2014-08-29 21.00.01

BR0484I BRBACKUP log file: F:\oracle\SID\sapbackup\beoqasbx.ant

BR0280I BRBACKUP time stamp: 2014-08-29 21.00.

BR0301E SQL error -1031 at location BrInitOracreate-2

ORA-01031: insufficient privileges

BR0303E Determination of Oracle version failed

BR0056I End of database backup: beoqasbx.ant 2014-08-29 21.00.19

BR0280I BRBACKUP time stamp: 2014-08-29 21.00.

BR0054I BRBACKUP terminated with errors.

Thanks&Regards

nani

I did a standard restore using BRtools. But my ABAP system is working fine, oracle working fine but JAVA part is not working fine.

Means the java application server is not getting started.please help...