Hello Experts,
I am developing one application on web dynpro java, here the users will enter data and the data will be stored in Oracle database, while saving the form i am having this exception:
java.sql.SQLException: Invalid column index
please help me out with this error
Hi Experts,
I have an issue in my IDES server. When I try logging in I face the following error "An SQL Error occured when accessing the table".
Even I have checked my tablespaces using brtools.
List of database tablespaces:
Pos. Tablespace Type Status ExtMan. SegMan. Backup Files/AuExt.
Total[KB] Used[%] Free[KB] ExtSize[KB] FreeExt. Largest[KB]
1 - PSAPIDS DATA ONLINE LOCAL AUTO NO 37/37
87783424 94.63 4712384 96593920 15 9185280+:8069120
+:8069120+:8069120+:8048640+
2 - PSAPIDS640 DATA ONLINE LOCAL AUTO NO 20/20
48222208 98.50 721280 96604160 24 8990720+:7905280
+:7884800+:7864320+:7761920+
3 - PSAPIDSUSR DATA ONLINE LOCAL AUTO NO 1/1
51200 68.00 16384 10188800 1 10188800+:16384:0
:0:0
4 - PSAPTEMP TEMP ONLINE LOCAL MANUAL NO 1/1
2048000 71.10 591872 8192000 1 8192000+:591872:
0:0:0
5 - PSAPUND1 UNDO ONLINE LOCAL MANUAL NO 1/1
10485760 0.01 10484352 23068656 3 23068656+:4063232
:4061888:2359232:0
6 - SYSTEM DATA ONLINE LOCAL MANUAL NO 1/1
870400 67.10 286336 9369600 2 9369600+:285632:
Please help me with the solution.
Thanks in Advance,
Satheesh E
Dear All,
We are using ERP 6 EHP5 with Oracle 11G and windows 2008 on VMware environment.
We are scheduling every month cost-run report and It would be completed time one days or more than 35 hrs.So that time we facing critical objects alert and also background job had been canceled immediately.
We are facing frequently this problem. Please any body give us good solution.
Temp solution:
If I extended 3 or 4 GB for the particular table space then it will complete the job successfully.
Note :
We don't have more space in our storage.
Normally our database's all table space size less than 60 %.
Our database size is 2 TB.
Please see the below alert screen
| Owner | Name | Partition | Type | Tablespace | Size(MB) | Next Extent(MB) | Max Free(MB) | Alert Type |
| SAPR3 | CKIS~0 | INDEX | PSAPBTABI | 13,150.14 | 1,280.00 | 3,071.99 | 2 | |
| SAPR3 | CKIT~0 | INDEX | PSAPBTABI | 13,117.65 | 1,280.00 | 3,071.99 | 2 | |
| SAPR3 | CNVCLU | TABLE | PSAPBTABI | 25,400.02 | 1,280.00 | 3,071.99 | 2 | |
| SAPR3 | COEP~0 | INDEX | PSAPBTABI | 19,237.47 | 1,280.00 | 3,071.99 | 2 | |
| SAPR3 | EDI40 | TABLE | PSAPCLUD | 31,298.34 | 2,047.93 | 3,999.99 | 2 | |
| SAPR3 | ARFCSDATA | TABLE | PSAPBTABD | 19,132.05 | 1,280.00 | 1,278.46 | 1 | |
| SAPR3 | CKIS | TABLE | PSAPBTABD | 73,547.31 | 2,047.93 | 1,278.46 | 1 | |
| SAPR3 | CKMLPRKEPH~0 | INDEX | PSAPSTABI | 5,199.48 | 640 | 615.51 | 1 | |
| SAPR3 | CMFP | TABLE | PSAPBTABD | 24,030.02 | 1,280.00 | 1,278.46 | 1 | |
| SAPR3 | COEP | TABLE | PSAPBTABD | 88,310.13 | 2,047.93 | 1,278.46 | 1 | |
| SAPR3 | COEP~1 | INDEX | PSAPBTABI | 34,534.56 | 2,047.93 | 3,071.99 | 1 | |
| SAPR3 | TST03 | TABLE | PSAPBTABD | 59,365.88 | 2,047.93 | 1,278.46 | 1 |
Thank you
Mahendran
Hi friends,
is that possible to do system copy from 10g to 11g database
source system-
ECC 6 with EHP4
oracle 10g
HP-UX
Target-
ECC 6 with EHP4
oracle 11g
HP-UX
is that possible to do system copy in ABAP stack
if possible then please suggest me steps..
Thanks
Rahul
Hello
For backup/restore system copy of an ECC system I would need to know exact name of ABAP schema.
I think this is written in system->status->Database data->owner
Am I 100% right?
Thank you in advance
Jan
Hi
Our client has puchased the SAP Enterprise License and would like to implement the Oracle dataguard for our SAP system.
The system details are as below:
1. SAP system : SAP ECC 6.0 EHP5
2. Operating System: Window 2008 R1
3. Database : Oracle 11.2.0.3
Please clarify below doubts :
1. To implement the oracle redolog transfer in compression mode deoes the license is required. The configuration details where we should put the compression is as below:
LOG_ARCHIVE_DEST_2='SERVICE=RQ9 ASYNC NOAFFIRM VALID_FOR=(ONLINE_LOGFILE, PRIMARY_ROLE) REOPEN=60 COMPRESSION=ENABLE DB_UNIQUE_NAME=RQ9_PRD' LOG_ARCHIVE_DEST_STATE_2='ENABLE'
2. Can I used the above compression method ? If yes then what is the compression % , please suggestion.
Regards
Vimal
Hi ,
Last week we had a preventive maintenance shutdown at our data center. After that activity when we tried to bring back our servers we started facing some issue in our Sandbox system which is running on Linux & Oracle.
We couldn't start the oracle server , we tried through sqlplus,
SQL> startup;
ORACLE instance started.
Total System Global Area 2298478592 bytes
Fixed Size 2085616 bytes
Variable Size 1157631248 bytes
Database Buffers 1124073472 bytes
Redo Buffers 14688256 bytes
ORA-00205: error in identifying control file, check alert log for more info
The alert log file has error "Permission denied"
Thu Jan 2 17:35:02 2014
ORA-00202: control file: '/oracle/R01/origlogB/cntrl/cntrlR01.dbf'
ORA-27041: unable to open file
Linux-x86_64 Error: 13: Permission denied
Additional information: 2
Thu Jan 2 17:35:02 2014
ORA-205 signalled during: ALTER DATABASE MOUNT...
But cntrlR01.dbf has file permission 755...
ls -ltr
total 15044
-rwxr-xr-x 1 orar01 dba 15384576 Jan 2 16:44 cntrlR01.dbf
Even we tried after restoring the DB , but still facing the same issue. Any idea , how we can resolve this?
Hi experts
I have some problem with backup SAP
-new configuration
- windows 2008 Entreprise
LOG :
SAP_SCHEDULED = 1
SAP_USER_INITIATED = 0
SAP_SERVER = bkp-srv1
SAP_POLICY = solmanprod-online-backup
SAP_SCHED =
SAP_SNC_SCHED = FULL
BR0051I BRBACKUP 7.20 (20)
BR0169W Value 'ibs=' of parameter/option 'dd_in_flags' ignored for 'Windows' - 'bs=' assumed
BR0055I Start of database backup: bemwgqqq.anf 2013-12-30 13.23.12
BR0484I BRBACKUP log file: O:\oracle\Y12\sapbackup\bemwgqqq.anf
BR0477I Oracle pfile D:\oracle\Y12\11203\database\initY12.ora created from spfile D:\oracle\Y12\11203\database\spfileY12.ora
BR0280I BRBACKUP time stamp: 2013-12-30 13.23.20
BR0319I Control file copy created: O:\oracle\Y12\sapbackup\CNTRLY12.DBF 20267008
BR0280I BRBACKUP time stamp: 2013-12-30 13.23.20
BR0057I Backup of database: Y12
BR0058I BRBACKUP action ID: bemwgqqq
BR0059I BRBACKUP function ID: anf
BR0110I Backup mode: ALL
BR0077I Database file for backup: O:\oracle\Y12\sapbackup\CNTRLY12.DBF
BR0061I 12 files found for backup, total size 75409.414 MB
BR0143I Backup type: online
BR0130I Backup device type: util_file_online
BR0109I Files will be saved by backup utility at file level
BR0142I Files will be switched to backup status during the backup
BR0126I Unattended mode active - no operator confirmation required
BR0280I BRBACKUP time stamp: 2013-12-30 13.23.20
BR0229I Calling backup utility with function 'backup'...
BR0280I BRBACKUP time stamp: 2013-12-30 13.23.20
BR0266E Program 'C:\usr\sap\Y12\sys\exe\run\backint.exe -u Y12 -f backup -i O:\oracle\Y12\sapbackup\.bemwgqqq.lst -t file_online -p D:\oracle\Y12\11203\database\initY12.utl -c' interrupted, exit status: c0000135
BR0272E Execution of program 'C:\usr\sap\Y12\sys\exe\run\backint.exe -u Y12 -f backup -i O:\oracle\Y12\sapbackup\.bemwgqqq.lst -t file_online -p D:\oracle\Y12\11203\database\initY12.utl -c' through pipe failed
BR0280I BRBACKUP time stamp: 2013-12-30 13.23.20
BR0231E Backup utility call failed
BR0056I End of database backup: bemwgqqq.anf 2013-12-30 13.23.20
BR0280I BRBACKUP time stamp: 2013-12-30 13.23.23
BR0054I BRBACKUP terminated with errors
Execution of BRBACKUP command failed - exiting
I frequently observe high paging in 'st06 - detail analysis - Memory' on Oracle 11g Windows 2008 systems. The lowest Mimimum Free RAM is 3GB with an average of 4GB free. SAPNote 689818 explains that Windows cannot differnetiate between disk IO and paging and further explains that IO during backups may be reported as high paging. This explains the high page rates reported during my backups but I also see high paging during normal operations. On an AIX based system I would only expect to see high paging if RAM was low or exhausted, but as explained above there is no shorage of RAM.
I am wondering if other BW processing such as BEX analyser or WEB reports may be getting reported as Page for the same reasons described above. Do any Windows Gurus have views on this? Should I be asking for more RAM?
Hi,
We have a new requirement to perform System Copy.
Scenario:
Will be a Homogeneous System Copy with Oracle backup/restore method.
Source system details:
OS: RHEL 5.9 on X86_64
Database: Oracle 11.2.0.2
File System Details: In source sapdata files are spread across different mount points (/oracle/SSID/sapdata1 ... to ... /oracle/SSID/sapdata8)
Target System details:
OS: RHEL 6 on X86_64
Database: Oracle 11.2.0.3 (As we are going to install SAP in updated OS we have to use Oracle 11.2.0.3)
File System Details: In target system sapdata will be placed in four different mount points (/oracle/TSID/sapdata1 .... to .... /oracle/TSID/sapdata4)
Question:
1. Is it possible to do system copy with small patch oracle level change between source (11.2.0.2) & target (11.2.0.3) ?
2. Will it be possible to reduce/consolidate sapdata file numbers from 8 to 4?
or
3. Will it be possible to distribute 8 sapdata files within four File system mount points in target ?
Please provide your valuable suggestions..
Thanks & Regrads
Rajat
Hi Experts,
We lost eight(8) production archive files because of backup failure through HP Data protector
We are using the archive for DR restoration but now it's causing inconsistency and restoration is not possible.
Currently my DR is in stable condition till 4~5 day ago situation, now i need point in time recovery on DR server without lost archives.
Currently I have last week cold backup+yesterday online backup+archive after online backups.
Can you please suggest that it's possible to restore online backup on current situation using DP or I need to go through complete recovery procedure.
Either suggest the alternate way of point in time recovery.
Regards,
Vinay Shrimali
Good evening,
We have recommendation in our systems, to apply the latest Oracle CPUs, if possible 4 times x year, when they are released ( Jan, Apr, July, Oct, etc )
I have a question to everyone, are these Oracle CPU patches the same thing as SAP Bundle Patches ? Is the CPU included in the SBP ? Or they are totally different activities?
Kindly ask you to advise,
J.
Hi Experts,
I started with Oracle10g OS: B.11.31 version, SAP ECC5.0 Brrestore Method, System copy import method.
Now started Oracle Installation asking some pre-requisites I solved after completion showing OS related Error message
Version could not supported. pls tell me how to modify that version. I attached tha log information.
================================
Preparing response files. Please wait:
======================================
Working on /software/db/database/SAP/SVRCUSTOM.RSP
........................................................................
........................................................................
........................................................................
........................................................................
........................................................................
........................................................................
........................................................................
........................................................................
........................................................................
........................................................................
........................................................................
..............................................................
/software/db/database/SAP/SVRCUSTOM.RSP --> /tmp/.orainst_rsp.13513: Done
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be B.11.23. Actual B.11.31
Failed <<<<
Exiting Oracle Universal Installer, log for this session can be found at /oracle/TPU/102_64/logs/installActions2013-12-31_02-23-20PM.log
Thanks & Regards,
Basis Team
Hello,
I've got one SAP system on Oracle - single Oracle instance without ASM. It has average (user calls average based on 2 months period) 17 000 user calls per second and daily around 2 million dialog steps + 1,5 million of RFC+UPD+BGD steps together.
We are following SAP rules regarding DB parameters and tuning expensive SQL statements (in top 20 selects sorted by DB time we don't have any
select with more than 5 blocks read by each row, I'm aware that it is not only one criteria, but it is to show that system is being tuned (not that all
are tuned but all of top resource consuming SQLs from cursor cache looks fine) from expensive SQLs perspective. I’m aware that very often expensive SQLs causing very often unnecessary load.
Our storage vendor did checks and claims that there are no hot spots on storage and it has a free resources to handle current load twice (IOPs). I would like to know where this configuration could have bottlenecks. Some times (especially when load on db is higher than usual) I see queue and wait times on dm* devices. Configuration looks in this way:
Linux SLES 11 SP1. LUNs configured from OS to storage:
Please let me know if you have experience with similar load and Oracle on Linux architecture and what configuration you have or what you would improve for above (please give a hints basing upon your experience)
Thanks in advance,
Marek
Hello
The environment I am describing is 32 bit Windows.
Our SAP Portal system is still running Oracle 9.2.0.6. I need to get this upgraded to 11g & I'm not clear which is the best route to follow to do this.
I have seen documentation which says that a direct upgrade from as old as 9.2.0.4 to 11g is supported but other documentation seems to imply that the earliest which is supported is 9.2.0.8.
I have also recently upgraded on Widnows from 10.2.0.1 to 11g & discovered that I needed to go to 10.2.0.2 before I could move to 11g - this wasn't in any documentation I saw until the error occurred & I searched explicitly for a solution.
Does anyone have experience of this & can you offer any advice?
The database on our portal system is , as far as I understand it, only used to hold user information.
Any advice appreciated.
Thanks, Chris
Current Environment: SAP Dev System Oracle Version 10, UNIX HP v11
I am trying to upgrade the Oracle Database from 10 to 11.3, when I run the OUI it cancels or errors out at the following step i.e. Provide Previliged user groups. I know I have to select the default entries provided but when I select that it fails.
Also when I change the default entries it still fails.
I have checked the groups i.e. DBA and OPER.
I have changed the entries in /etc/group file and edited using Vi editor and added ora<SID> in group file under dba group, after reading the SCN blogs.
Can some one help this I cannot move past this step.
Help is appreciated.
Hi Experts,
I am new HP-UX with SAP, Now I start the SANDBOX server for Upgrade Testing,
I having some doubt how to install Orcale Pre-Requisites, What are the Env I need to set,
Please tell me and give any reference guide.
Hi Experts,
What are the parameters we need to monitor at the time of slow experience of the performance of the system , we are having two IBM power 4, AIX 6.1 , systems with Oracle 10.2.0.4 systems.
One is System is central instance and another is application instance, and we are having 330 users in SAP.
Please suggest us.
Regards
Rj
Hi Folks,
I have a doubt suppose i am running the statistics manually, and i want to check the logs for whether the statistics have been updated or not.
I can check the same from DB02old checks dates of table analysis,
How can i check the same from dbacockpit?
I am not using brconnect to schedule the jobs, i am doing it manually.
Thanks,
Hi Team,
I have this strange issue where i get connected to idle instance whenever i type asmcmd from oracle user.
oracle user is part of the asmadmin group.
ORACLE_SID is the same as we get fro instance_name from v$instance.
Do we still have to set some parameters in order to launch asmcmd?
