Hi,
I would like to test Oracle Data Guard with existing ECC 6.00 system on Windows 2003 R2 with Oracle 11.2... I find this document:
Have you any other ?
Thank you.
Hi,
I would like to test Oracle Data Guard with existing ECC 6.00 system on Windows 2003 R2 with Oracle 11.2... I find this document:
Have you any other ?
Thank you.
Hi,
We need to restore a full backup a week ago as audit needs to check access logs that have been deleted.
Just need clarification from all as we aim to do a point in time recovery(PIT) and restore in another server.
First step is that we have run the restore command brrestore -m full -b bekmsq.fnf -u system/******* -c
After restore was completed, we ran the command recover database.
And it has been asking for archivelogs which timestamp were hours after the time that we have identified as PIT.
Can anyone advise us if what we are doing is correct?
Definitely need help.
BRTOOLS version 7.20
Thanks.
Saiful
Hi,
Our Production system system Oracle11.2.0.3.0, database which is 650GB of size is taking 9-10Hrs for the online backup.
We are using HP data protector and our database is running on HP-Unix B.11.31, the backup is going through SAN.
How to find the bottleneck, how we can improve the perfomance?
Regards,
sam
Hi Experts,
Can anybody please help let me know the maximum and minimum values of topas command in context of SAP ecc6.0, oracle 10.2.0.4 and AIX6.1.
It will be quite helpful.
Regards
Rj
can anyone tell me procedure to schedule offline backup method for Java instance in Oracle databse ?
HI..
We are doing some sizing for HANA and would like to understand how to get sizes of these tables KONV & BSEG. as they are POOL & CLUSTER Tables.
Rgds
PR
Hi experts,
I performed the database refresh on quality with production backup.
Did all the necessary steps. But when starting the quality system ABAP part is up but there is no j2ee processes in MMC.
and disp+work is not up fully as in screenshot.
system detail is as:
ECC6.0 ehp3.
Oracle 10g
windows 20xx.
the log details are as
dev_disp
Mon Dec 23 16:33:11 2013
*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5418]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >DEVQA_QAS_00 <
DpShMCreate: sizeof(wp_adm) 29792 (1752)
DpShMCreate: sizeof(tm_adm) 5912704 (29416)
DpShMCreate: sizeof(wp_ca_adm) 24064 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000EBC0050, size: 6614016)
DpShMCreate: allocated sys_adm at 000000000EBC0050
DpShMCreate: allocated wp_adm at 000000000EBC21F0
DpShMCreate: allocated tm_adm_list at 000000000EBC9650
DpShMCreate: allocated tm_adm at 000000000EBC96B0
DpShMCreate: allocated wp_ca_adm at 000000000F16CF30
DpShMCreate: allocated appc_ca_adm at 000000000F172D30
DpShMCreate: allocated comm_adm at 000000000F174C70
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000F1FB900
DpShMCreate: allocated gw_adm at 000000000F1FB980
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000F1FB9B0
DpShMCreate: allocated wall_adm at 000000000F1FB9C0
MBUF state OFF
DpCommInitTable: init table for 500 entries
rdisp/queue_size_check_value : -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
<ES> Info: em/initial_size_MB( 16378MB) not multiple of em/blocksize_KB( 4096KB)
<ES> Info: em/initial_size_MB rounded up to 16380MB
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
Mon Dec 23 16:33:12 2013
<ES> 4094 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
J2EE server info
start = TRUE
state = STARTED
pid = 3620
argv[0] = D:\usr\sap\QAS\DVEBMGS00\exe\jcontrol.EXE
argv[1] = D:\usr\sap\QAS\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\QAS\SYS\profile\QAS_DVEBMGS00_DEVQA
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=65000
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=QAS
argv[7] = -DSAPMYNAME=DEVQA_QAS_00
argv[8] = -DSAPPROFILE=D:\usr\sap\QAS\SYS\profile\QAS_DVEBMGS00_DEVQA
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1692]
***LOG Q0K=> DpMsAttach, mscon ( DEVQA) [dpxxdisp.c 12429]
DpStartStopMsg: send start message (myname is >DEVQA_QAS_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: Checking Downtime Configuration of Monitoring Segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 184
Release check o.K.
DpJ2eeLogin: j2ee state = CONNECTED
Regards,
Gesh Raj
Hello Experts,
I am new to SAP and very eager to learn, while i was doing the system check i found the following error on DB12, I would like to know how to access to Oracle DB from SAP, or is this DB admin can do it, in order to fix the following issue, can anyone could kindly assist me step by step, I would very much appreciate it, please remember i am new and be easy on me pls
BR0948I 0 rows deleted from table SAPSR3.DBAREOL
BR0280I BRCONNECT time stamp: 2013-12-23 03.00.43
BR0948I 0 rows deleted from table SAPSR3.DBASPAL
BR0280I BRCONNECT time stamp: 2013-12-23 03.00.43
BR0948I 10 rows deleted from table SAPSR3.DBATL
BR0280I BRCONNECT time stamp: 2013-12-23 03.00.43
BR0948I 10 rows deleted from table SAPSR3.DBMSGORA
BR0280I BRCONNECT time stamp: 2013-12-23 03.00.43
BR0301E SQL error -1031 at location dblog_cleanup-5
ORA-01031: insufficient privileges
BR0280I BRCONNECT time stamp: 2013-12-23 03.00.43
BR0301E SQL error -1031 at location dblog_cleanup-6
ORA-01031: insufficient privileges
BR0806I End of BRCONNECT processing: cemuxdiv.cln 2013-12-23 0
BR0280I BRCONNECT time stamp: 2013-12-23 03.00.44
BR0804I BRCONNECT terminated with errors
Hi experts,
As i have restored the data on quality system from production system. But now I am facing problem during OPS$ user creation.
When I am running the user creation command as per note 50088 it is showing table space 'PSAPUSER1D' does not exist.
looking for your responses.
Regards,
Gesh Raj.
Dear All,
We are using ERP 6 EHP5 with Oracle 11G and windows 2008 on VMware environment.
We are scheduling every month cost-run report and It would be completed time one days or more than 35 hrs.So that time we facing critical objects alert and also background job had been canceled immediately.
We are facing frequently this problem. Please any body give us good solution.
Temp solution:
If I extended 3 or 4 GB for the particular table space then it will complete the job successfully.
Note :
We don't have more space in our storage.
Normally our database's all table space size less than 60 %.
Our database size is 2 TB.
Please see the below alert screen
Owner | Name | Partition | Type | Tablespace | Size(MB) | Next Extent(MB) | Max Free(MB) | Alert Type |
SAPR3 | CKIS~0 | INDEX | PSAPBTABI | 13,150.14 | 1,280.00 | 3,071.99 | 2 | |
SAPR3 | CKIT~0 | INDEX | PSAPBTABI | 13,117.65 | 1,280.00 | 3,071.99 | 2 | |
SAPR3 | CNVCLU | TABLE | PSAPBTABI | 25,400.02 | 1,280.00 | 3,071.99 | 2 | |
SAPR3 | COEP~0 | INDEX | PSAPBTABI | 19,237.47 | 1,280.00 | 3,071.99 | 2 | |
SAPR3 | EDI40 | TABLE | PSAPCLUD | 31,298.34 | 2,047.93 | 3,999.99 | 2 | |
SAPR3 | ARFCSDATA | TABLE | PSAPBTABD | 19,132.05 | 1,280.00 | 1,278.46 | 1 | |
SAPR3 | CKIS | TABLE | PSAPBTABD | 73,547.31 | 2,047.93 | 1,278.46 | 1 | |
SAPR3 | CKMLPRKEPH~0 | INDEX | PSAPSTABI | 5,199.48 | 640 | 615.51 | 1 | |
SAPR3 | CMFP | TABLE | PSAPBTABD | 24,030.02 | 1,280.00 | 1,278.46 | 1 | |
SAPR3 | COEP | TABLE | PSAPBTABD | 88,310.13 | 2,047.93 | 1,278.46 | 1 | |
SAPR3 | COEP~1 | INDEX | PSAPBTABI | 34,534.56 | 2,047.93 | 3,071.99 | 1 | |
SAPR3 | TST03 | TABLE | PSAPBTABD | 59,365.88 | 2,047.93 | 1,278.46 | 1 |
Thank you
Mahendran
Hi
can anybody tell me what could be password of sapsr3700 in oracle.
Thanks in advance
Ravi Kant Arya
Hi,
In system log we found database error, how to repair the corrupted data block in ORACLE.
Database error 1578 at FET
ORA-01578; ORACLE data block corrupted (file # 1, block # 56449) #ORA-01110; data file 1;
/oracle/SID/sapdata1/system_1/system.data1
Regards,
R.Ramkumar
Dear All
I need some clarification for DR configuration. I have production system installed on Window 2008 r2, oracle database 11.2.0.2 which MCS cluster as high availability option for ECC 6.0 EHP5. We have procured the same OS and database software at DR site also. Now I am planning to configure the DR system.
Please clarify the below doubts:
Question: Is it right option , please suggest?
2. For disk configuration at server and storage level we should consider the same as production or some other method.
Question: Quorum disk for cluster etc, LUN level etc at storage level should be same as production ? please clarify
3. Are we should go for the installation of SAP software at DR system and the restore the database? There may be changes in software
information at DR system and informay may not match with production system.
Question: Is it right option, please suggest?
Regards
Vimal
Hello All,
SPS upgrade got failed on extraction phase using SUM tool:
Below is the error log :
Unable to execute the SDT request ABAP operation extract on hostname sapdev instance 00 Extraction of the ABAP upgrade request ABAP has failed Error from unit observer Tool connector failed with . Start of SAPup failed: OS process 'D:\SUM\abap\bin\SAPup.exe' start failed. java.io.IOException: CreateProcess error=14001, This application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem java.io.IOException: CreateProcess error=14001, This application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem . OS process 'D:\SUM\abap\bin\SAPup.exe' start failed. java.io.IOException: CreateProcess error=14001, This application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem java.io.IOException: CreateProcess error=14001, This application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem
Dear all,
I have upgraded oracle from 10205 to 11203 and executed all steps as per upgrade guide.
I executed utlrp.sql scripts but still getting following invalid Objects.
SQL> SELECT OBJECT_NAME FROM DBA_OBJECTS WHERE STATUS = 'INVALID';
OBJECT_NAME
--------------------------------------------------------------------
DBMS_METADATA_INT
DBMS_METADATA_UTIL
XDB_MIGRATESCHEMA
3 rows selected.
Would you guide me which scripts I have to execute to compile above objects?
Regards,
Hello All,
Oracle is 10G.
Currently system is running 4 sap datafiles .
oracle/SID/sapdata1
oracle/SID/sapdata2
oracle/SID/sapdata3
oracle/SID/sapdata4
Now can we make it as one datafile (we required to only one file system - oracle/SID/sapdata1).
Please let me know it is possible to make single sapdata1 ?
Please advise and provide steps also .
Hi,
As per SAP Note 1738053 there is an option to install SAP directly on Oracle RAC ASM. But in some SAP forums its been discussed that SAP will not support direct installation on RAC ASM. Can anyone had installed SAP directly on RAC.
Thanks & Regards
Kishore
Current Environment: SAP Dev System Oracle Version 10, UNIX HP v11
I am trying to upgrade the Oracle Database from 10 to 11.3, when I run the OUI it cancels or errors out at the following step i.e. Provide Previliged user groups. I know I have to select the default entries provided but when I select that it fails.
Also when I change the default entries it still fails.
I have checked the groups i.e. DBA and OPER.
I have changed the entries in /etc/group file and edited using Vi editor and added ora<SID> in group file under dba group, after reading the SCN blogs.
Can some one help this I cannot move past this step.
Help is appreciated.
Hi Team,
We have installed 9 different languages on our ECC environment. Now we have to activate some BC sets for all 9 languages but first want to activate them for "English" and "German" language only.
1. Is it possible that same BC sets can be activated for other 7 languaes later. Please let me know if some document or some SAP note is available.
Thanks
Ashish
Hi All,
I am trying to convert two tablespaces from Dictionary Managed to Locally Managed.
Below are the two tablespaces which are dictionary managed:
PSAPROLL
SYSTEM
All other tablespaces are local.
I am following SAP Note 646681 for this conversion.
Our SAP and Oracle Environment:
SAP R/3 4.7 110
Oracle 9.2.0.8
32-bit
I am following below steps:
1. First trying to convert PSAPROLL
2. Created a new tablespace PSAPECC1 with below command
brspace -u / -f tscreate -t PSAPECC1 -s 700M -a yes -m 10000M -i 20M -l {PSAPROLL}
3. Tablespace PSAPECC1 is created.
4. Now trying to do Online reorganization of tables with below command
brspace -u / -f tbreorg -s PSAPROLL -t "*" -n PSAPECC1
I am getting error message 'Table name "*" not found.
I tried removing quotes, adding SAPECC.* as table name. But I get same error message.
Any suggestions or help on this please.
Let me know exact process if I am doing it wrong.
Thanks,
Shrik.